Welding Tips and Tricks

Made a cart that will hold mig, tig, and plasma on four wheels.

Nicely capped tubes etc. Damn nice job.

The top shelf is angled at 100 degrees for easy reading of front panels. There are no front corner posts for easy access to lower shelves. There are six 1 1/2 x 4 side hooks for leads and electric lines. The filler rod side shelf is 1 1/2 x 10" long. And the tank shelve is large enough to hold 240 bottles. This unit fits through a 32 " door.

Got lucky on the diamond plate, in salvage pile was a full sheet of 14 gauge 4 x 10 with one end ran over by a fork lift. $50...Score!