Welding Tips and Tricks

Hey guys. I wanted to share a video of my welding table I built a couple of years ago. I just uploaded a video of it on YouTube. Before I built it I searched all of the various forums, google, youtube, etc. and anything else I could find when I was trying to figure out how I should build my welding table. I wanted to share this with anyone who might be doing the same thing now and/or is looking for ideas to make changes to their current table.

YOUTUBE VIDEO - My domain http://www.retroweld.com will take you to my youtube channel. I gained a bunch of good ideas from you guys back then so I wanted to share it with you in hopes someone will benefit from it.

Hope it helps. Thanks everyone.

Douglas.

Guys, this thread is to help everyone and to give people good ideas if they are building or plan to build a welding table. Feel free to share pictures of your welding table here if you like. Thanks.

Thanks, Retroweld,

There are probably more cart ideas here then tables, but if you search this section, you'll find some awesome tables with, in some cases, more than a hundred hours of work.

For example:
http://forum.weldingtipsandtricks.com/v ... f=9&t=6850

We'll look at any idea. And probably turn it in it's head.

Welcome to our community!

Steve S

Otto Nobedder wrote:Thanks, Retroweld,

There are probably more cart ideas here then tables, but if you search this section, you'll find some awesome tables with, in some cases, more than a hundred hours of work.

For example:
http://forum.weldingtipsandtricks.com/v ... f=9&t=6850

We'll look at any idea. And probably turn it in it's head.

Welcome to our community!

Steve S

Thanks. That is a really nice table. I wish mine had holes on top like that. I'm always needing to clamp something.