I sold it last year then started the conversion.
- P1010228.JPG (52.02 KiB) Viewed 726 times
- IMG_20131101_195114_195.jpg (23.88 KiB) Viewed 726 times
Some modifications
- P1010370.JPG (63.85 KiB) Viewed 726 times
welditforyou
- welditforyou
-
New Member
-
Posts:
-
Joined:Mon Jul 21, 2014 12:08 pm
-
Location:Missouri
I posted on another thread about converting a boat trailer to cargo trailer. Obviously to do this, it has to be the right trailer to start with. The boat trailer had 2x4x11ga rec tube. The red trailer below I bought from a manufacturer had the 1-1/2 x 3 by whatever they used.
I sold it last year then started the conversion. This is the boat trailer I bought at night out in a rural community.
Some modifications
I sold it last year then started the conversion. This is the boat trailer I bought at night out in a rural community.
Some modifications
Last edited by welditforyou on Thu Aug 07, 2014 10:34 am, edited 3 times in total.
Don't worry, you can't do anything to it that we can't fix!
HTP 221 tig/stick welder
HTP 2400 mig welder
oxy/acetylene cut & weld
plasma cutter
atlas lathe
and a bunch of other stuff
2 TIG FINGERS and 2 WT&T T-shirts
HTP 221 tig/stick welder
HTP 2400 mig welder
oxy/acetylene cut & weld
plasma cutter
atlas lathe
and a bunch of other stuff
2 TIG FINGERS and 2 WT&T T-shirts
welditforyou
- welditforyou
-
New Member
-
Posts:
-
Joined:Mon Jul 21, 2014 12:08 pm
-
Location:Missouri
Spent a little money on material
I don't have a pic of it skinned yet, but it's coming along.
Jim
- P1010393.JPG (59.66 KiB) Viewed 723 times
Jim
Don't worry, you can't do anything to it that we can't fix!
HTP 221 tig/stick welder
HTP 2400 mig welder
oxy/acetylene cut & weld
plasma cutter
atlas lathe
and a bunch of other stuff
2 TIG FINGERS and 2 WT&T T-shirts
HTP 221 tig/stick welder
HTP 2400 mig welder
oxy/acetylene cut & weld
plasma cutter
atlas lathe
and a bunch of other stuff
2 TIG FINGERS and 2 WT&T T-shirts
