What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
rahtreelimbs
  • Posts:
  • Joined:
    Mon Jun 14, 2010 10:39 pm

I have a lamp in front of my home that either needed replaced of redone...........I decided to redo it. The lenses were ugly and yellowed. I decided to replace them with expanded metal. I am using a a halogen bulb.........we will see how the weather treats it. I also made an adjustable plant hanger out of 1 inch 304 stainless strap.

Image

Image

Image


The wife's birthday is coming up and thought I would do something original using my skills and what ever I had laying around.........I did purloin the copper from work and the only cost was a rattle can of clear.

Image

Image

Image
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

In a past life I was given a job to build a custom lamp just like the one you have. It was a bid job and only for a couple hours. I don't remember how long it took me but it was at least double what they thought. Turned out very nice, was a pain to paint and we learned that it takes longer to build one of those than one thought. Chalk that one up for a learning experience.

Ok story times over, looks very nice. I have wanted to tackle a rose for some time, I guess there is no time like the present.
-Jonathan
countryboy83
  • Posts:
  • Joined:
    Sun Jun 15, 2014 4:07 pm
  • Location:
    Live in central part of Louisiana - Work Offshore in the Gulf of Mexico

those roses are amazing!! could you give a little bot of insight on how you went about making these?
delraydella
  • Posts:
  • Joined:
    Mon Apr 25, 2011 7:35 pm
  • Location:
    Detroit, MI

The roses are awesome! I made one for my future wife, she loved it, but I think yours turned out better than mine. My stem was too big of a diameter, but it was all I had lying around. I used 1/4 pipe for a stem, should have went out and bought 1/8th.

countryboy
they are pretty easy to make, if you type in making copper roses on youtube, there are a few videos that show you how. It's hard to explain without the visuals.

Other Steve
Attachments
1600.jpg
1600.jpg (42.59 KiB) Viewed 1481 times
WeldingSyncrowave 250,Millermatic 252,30a Spoolgun Cutting12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw MillingGorton 8d Vertical Mill TurningMonarch EE Precision Lathe GrindingBrown & Sharpe #5 Surface Grinder
rahtreelimbs
  • Posts:
  • Joined:
    Mon Jun 14, 2010 10:39 pm

countryboy83 wrote:those roses are amazing!! could you give a little bot of insight on how you went about making these?

I printed out a stencil off the web. Just Google "COPPER ROSE." You get instructions as well.
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Rich, I might have to try that.

I saw (finally) that I missed a couple calls from you again. I think this is a conspiracy from my cell phone provider... I only seem have issues receiving messages and calls when I'm eligible for an "upgrade" and contract renewal...

Anyone else get that feeling?

Steve S
Tassie Dave
  • Posts:
  • Joined:
    Wed Sep 03, 2014 2:04 am
  • Location:
    Tasmania

Hi Steve S
I live in the land down under mate ( Tasmania) and get it as well. Sometimes it says i have messages in my voicemail and i never even heard the bloody phone ring, i might add it was quiet at the time . Bloody telco's ripping you off.
I have an
Esab LHQ 150
Pro Weld TC256 ACDC multi process Tig Cut MMA
WeldSmart Mig 200IGBT Mig Tig MMA and spool gun

Post Reply