What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Had a 4.5 hour job on this cattle stock trailer.
Pics will explain.

Enjoy!!!

~John
IMG_3874.JPG
IMG_3874.JPG (85.91 KiB) Viewed 1482 times

So I consulted my metal pile.
IMG_3875.JPG
IMG_3875.JPG (203.61 KiB) Viewed 1482 times

And got 6 10' sticks, of 1/16' wall galvi pipe.

Cutting it down to 7'....
IMG_3876.JPG
IMG_3876.JPG (99.92 KiB) Viewed 1482 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

And the left overs.
IMG_3877.JPG
IMG_3877.JPG (85.37 KiB) Viewed 1481 times


Here is a quick tip for you guys (or gals) that make small gates/panels.
Lay a 2x4 on your table, and drive nails in, to make your own stronghand table.
These two here are from prevous panels I've built, but you get the idea.
IMG_3878.JPG
IMG_3878.JPG (89.37 KiB) Viewed 1481 times
IMG_3879.JPG
IMG_3879.JPG (84.21 KiB) Viewed 1481 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

So,
I laid two 2x4's on my table, and laid the pipe on the wood.
Than I drove these small nails, 8" apart.
IMG_3882.JPG
IMG_3882.JPG (69.51 KiB) Viewed 1480 times
IMG_3880.JPG
IMG_3880.JPG (105.11 KiB) Viewed 1480 times
IMG_3881.JPG
IMG_3881.JPG (87.82 KiB) Viewed 1480 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

This panel is going to 42" by 72" and for the end pieces, they are 1/8 wall pipe.
Gotta be heavy duty.
IMG_3883.JPG
IMG_3883.JPG (76.2 KiB) Viewed 1480 times

IMG_3884.JPG
IMG_3884.JPG (99.27 KiB) Viewed 1480 times
IMG_3885.JPG
IMG_3885.JPG (82.07 KiB) Viewed 1480 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Great fit on those tubes right???
I'm going to be using a 1/8 8010 rod for this, so its gonna be great!! :shock: :o :oops: :x :?
So I thought I'd crush the tubes right???
IMG_3886.JPG
IMG_3886.JPG (59.83 KiB) Viewed 1480 times
IMG_3887.JPG
IMG_3887.JPG (63.81 KiB) Viewed 1480 times
IMG_3888.JPG
IMG_3888.JPG (84.66 KiB) Viewed 1480 times
But that didn't, so I'll just have to scrap the entire project.

Sorry for wasting your time....
Last edited by AKweldshop on Sun Jul 06, 2014 1:07 pm, edited 1 time in total.
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

What a bunch of wasted effort!!

Guess I'll try something else now.

Any tips??

John ;) ;)
IMG_3889.JPG
IMG_3889.JPG (95.08 KiB) Viewed 1480 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

I'll just crimp them enough so that its a decent fit...
And, the tubing is 1/6 wall, as you can see, its quite difficult to stick weld with a 1/8 8010.
Feel free to tell me how ugly it looks, and how poor of quality of work I do....

Go ahead... You know you want to. :mrgreen:
IMG_3896.JPG
IMG_3896.JPG (80.31 KiB) Viewed 1473 times
IMG_3897.JPG
IMG_3897.JPG (86.36 KiB) Viewed 1473 times
IMG_3898.JPG
IMG_3898.JPG (90.87 KiB) Viewed 1473 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Keep the hate messages coming... ;)
IMG_3899.JPG
IMG_3899.JPG (105.68 KiB) Viewed 1472 times
IMG_3900.JPG
IMG_3900.JPG (113.84 KiB) Viewed 1472 times
IMG_3901.JPG
IMG_3901.JPG (87.44 KiB) Viewed 1472 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

So,
That was frustrating as it gets.

I thought sure I died and went to the wrong place, and was stuck welding burners and boilers.... :lol: :lol:
IMG_3902.JPG
IMG_3902.JPG (92.45 KiB) Viewed 1472 times
IMG_3903.JPG
IMG_3903.JPG (54.32 KiB) Viewed 1472 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

So,
The panel is all welded up.
Its stuck, and not coming apart.

So,
Now I've got to attach it to the trailer...
Pics will explain the rest.
IMG_3914.JPG
IMG_3914.JPG (55.59 KiB) Viewed 1472 times
IMG_3915.JPG
IMG_3915.JPG (111.12 KiB) Viewed 1472 times
IMG_3916.JPG
IMG_3916.JPG (82.88 KiB) Viewed 1472 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

So,
Got the welder set up, and leads run into the trailer, amperage about 75amps, pocketfull of 1/8 8010 and 3/32 7018.
IMG_3917.JPG
IMG_3917.JPG (115.1 KiB) Viewed 853 times
IMG_3918.JPG
IMG_3918.JPG (108.46 KiB) Viewed 853 times
IMG_3919.JPG
IMG_3919.JPG (109.21 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3920.JPG
IMG_3920.JPG (118.51 KiB) Viewed 853 times
IMG_3921.JPG
IMG_3921.JPG (99.96 KiB) Viewed 853 times
IMG_3922.JPG
IMG_3922.JPG (100.21 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3923.JPG
IMG_3923.JPG (100.91 KiB) Viewed 853 times
IMG_3924.JPG
IMG_3924.JPG (73.38 KiB) Viewed 853 times
IMG_3925.JPG
IMG_3925.JPG (119.6 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3926.JPG
IMG_3926.JPG (143.33 KiB) Viewed 853 times
IMG_3927.JPG
IMG_3927.JPG (140.21 KiB) Viewed 853 times
IMG_3928.JPG
IMG_3928.JPG (137.17 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3929.JPG
IMG_3929.JPG (94.52 KiB) Viewed 853 times
IMG_3930.JPG
IMG_3930.JPG (69.31 KiB) Viewed 853 times
IMG_3931.JPG
IMG_3931.JPG (111.28 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3931.JPG
IMG_3931.JPG (111.28 KiB) Viewed 853 times
IMG_3973.JPG
IMG_3973.JPG (129.53 KiB) Viewed 853 times
IMG_3974.JPG
IMG_3974.JPG (126.65 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3975.JPG
IMG_3975.JPG (129.27 KiB) Viewed 853 times
IMG_3976.JPG
IMG_3976.JPG (122.83 KiB) Viewed 853 times
IMG_3977.JPG
IMG_3977.JPG (166.83 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3978.JPG
IMG_3978.JPG (68.02 KiB) Viewed 853 times




Soooooo...
Got it all done, fully functional, and operational.
And we happened to have a cow in heat, so we thought we'd try it out.
IMG_3979.JPG
IMG_3979.JPG (88.08 KiB) Viewed 853 times


And BEHOLD!!!! :D

It works!!!
IMG_3980.JPG
IMG_3980.JPG (105.91 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_3981.JPG
IMG_3981.JPG (73.9 KiB) Viewed 853 times
IMG_3982.JPG
IMG_3982.JPG (29.4 KiB) Viewed 853 times
IMG_3983.JPG
IMG_3983.JPG (29.33 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

I'm not sure how many of you are familiar with artificial incimination, so I won't gruel you with the details.
Feel free to google it.
But this was the main reason we built this stall, as it makes it easy to do our work.
IMG_3986.JPG
IMG_3986.JPG (87 KiB) Viewed 853 times
IMG_3989.JPG
IMG_3989.JPG (62.63 KiB) Viewed 853 times
IMG_3990.JPG
IMG_3990.JPG (71.94 KiB) Viewed 853 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Now,
If you have a toothbrush in your hand while attempting this, you can just about brush the cow's teeth... :lol: :lol: :lol:

IMG_4001.JPG
IMG_4001.JPG (50.17 KiB) Viewed 972 times

And it survived its maiden voyage.

We'll see how it holds up....

Thanks for watching.

~John
IMG_4003.JPG
IMG_4003.JPG (87.89 KiB) Viewed 972 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Now,
This would've been great for mig, but since all I had was stick, we got it done.

Not pretty, but it will hold.

~~John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

That's what I call working with what you have. Did you try heating the ends before smashing them? I wouldn't have smashed them so far, you only need to smash the ends until you can put a good weld on. Speaking of welds....well.... :shock: You need to buy my 252 and that will solve your problems.
-Jonathan
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Superiorwelding wrote:That's what I call working with what you have. Did you try heating the ends before smashing them? I wouldn't have smashed them so far, you only need to smash the ends until you can put a good weld on. Speaking of welds....well.... :shock: You need to buy my 252 and that will solve your problems.
-Jonathan

Oh,
I only smashed them enough to get a good fit.
They were just fine for fit.



See,
Ship me your welder and that will stop my suffering. :D
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

OH the joys of AI :twisted: Nothing like being shoulder deep in a rump roast trying to thread a needle blindly. I hate the ones that kick. And it's always the heifers. ;)
It's always best to build your own, especially when it comes to hitches!!!
Matt
Post Reply