Page 1 of 1
My project
Posted: Wed Apr 02, 2014 5:24 pm
by ejpoter
I have antique tractors that I pull and play with. But don't have any way to haul them. So i bought an international truck. Needs a deck.here's my progress.[attachment=-1]uploadfromtaptalk1396473762105.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473780525.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473805039.jpg[/attachment]
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Wed Apr 02, 2014 5:25 pm
by ejpoter
[attachment=-1]uploadfromtaptalk1396473905556.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473917862.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473934371.jpg[/attachment]
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Wed Apr 02, 2014 5:33 pm
by AKweldshop
Man,
That looks like fun, I'm prolly gonna be doing something like that soon.
Nothing like working on trucks.
What tractors you got???
~John
Re: My project
Posted: Wed Apr 02, 2014 11:52 pm
by Superiorwelding
Looking good to me!
-Jonathan
Re: My project
Posted: Thu Apr 03, 2014 1:19 pm
by Cricket
Does it have enought clearance for the tire when it is fully pushed up? In case the truck is loaded and hits some bump on a road...
Re: My project
Posted: Thu Apr 03, 2014 2:32 pm
by ejpoter
I have john deeres. There is about 5.5 to 6 inches from the tire to chanel . Being its not air ride I thing I should be fine.
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Fri Apr 11, 2014 5:12 pm
by ejpoter
[attachment=-1]uploadfromtaptalk1397250749059.jpg[/attachment]
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Fri Apr 11, 2014 5:14 pm
by ejpoter
Here is a picture of my up hill 7018 cap on beaver tail / frame.
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Fri Apr 11, 2014 8:36 pm
by AKweldshop
Looks good!!
Here's a truck, I'm probably gonna be doing the same thing on.
- IMG_1344.JPG (79.76 KiB) Viewed 2284 times
- IMG_1345.JPG (81.43 KiB) Viewed 2284 times
- IMG_1209.JPG (70.43 KiB) Viewed 2284 times
Re: My project
Posted: Fri Apr 11, 2014 9:22 pm
by Bill Beauregard
ejpoter wrote:I have antique tractors that I pull and play with. But don't have any way to haul them. So i bought an international truck. Needs a deck.here's my progress.[attachment=-1]uploadfromtaptalk1396473762105.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473780525.jpg[/attachment][attachment=-1]uploadfromtaptalk1396473805039.jpg[/attachment]
Sent from my DROID RAZR HD using Tapatalk
Looks great! We did a Chevy C65 several years ago steel frame, 2-1/4" oak deck. Mine is rack body dump. I kinda wish we had gone with steel deck. We cut the trees, trucked with the same truck, and had enough oak milled for two floors. Lost my lumber storage when Hurricane Irene damaged the building, so now 7 years in I need new wood. I might better have sprung for steel in the first place.
As a kid I had an IH dealer near. They used an International with dump, and a deck extension. It had mounted under the deck a hydraulic cylinder with two pulleys it had about 13 feet of stroke with compound telescopic cylinder. It gave it 26' of winch cable travel. As I recall it must have dumped at about a four-twelve pitch. A little too steep for real comfort driving a Farmall on so you would winch it on. The thing worked great! When I turned 16 they often let me deliver or pick up. I thought I was a big deal!
Re: My project
Posted: Fri Apr 11, 2014 11:49 pm
by ejpoter
Thanks. I used a section of frame off an early 70s late 60s ford f600. For the beaver tail. Cut out the section I needed and welded it back tougher. Was going to scrap it but looks to cool to get rid of. I will get a pic.
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Sun Apr 20, 2014 1:57 pm
by ejpoter
[attachment=-1]uploadfromtaptalk1398016618836.jpg[/attachment][attachment=-1]uploadfromtaptalk1398016636945.jpg[/attachment][attachment=-1]uploadfromtaptalk1398016650796.jpg[/attachment]
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Sun Apr 20, 2014 1:59 pm
by ejpoter
The blue truck is the f600. I took a section of frame out of.
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Mon Apr 28, 2014 7:55 pm
by ejpoter
[attachment=-1]uploadfromtaptalk1398729322056.jpg[/attachment]
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Mon Apr 28, 2014 7:56 pm
by ejpoter
Truck is usable but not finished.
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Mon Apr 28, 2014 7:57 pm
by Otto Nobedder
Nice setup!
Apparently no trouble posting....
Steve S
Re: My project
Posted: Mon Apr 28, 2014 8:19 pm
by Bill Beauregard
That's very cool! Looks like you've got room for a nice Farmall M also. We live near a former International dealer, We have Internationals. Our friends are former John Deere dealers, (one generation removed), they have John Deeres. We have a horsepower advantage, they have a torque advantage. We have a friendly rivalry at antique tractor pulls.
Re: My project
Posted: Mon Apr 28, 2014 8:35 pm
by ejpoter
No posting works fine. I don't know what was going on.
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Mon Apr 28, 2014 8:39 pm
by ejpoter
Probably no red on this truck for a while. My brother in law is a farmall guy. I actually store his f20. Needs to be redone. When the deck is done it will easily fight two tractors.
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Mon Apr 28, 2014 8:40 pm
by ejpoter
[attachment=-1]uploadfromtaptalk1398731995694.jpg[/attachment]
Sent from my DROID RAZR HD using Tapatalk
Re: My project
Posted: Tue Apr 29, 2014 9:59 am
by ewils35
Thats an awesome looking rig.
Re: My project
Posted: Tue Apr 29, 2014 9:00 pm
by ejpoter
Thank you. Lot of work. 95% by my self.
Sent from my DROID RAZR HD using Tapatalk