Welding Tips and Tricks

I had this table project last year and i wanted to share it for you guys.
My idea was to build a sturdy adjustable welding table for cheap.
The challenge was finding way to lift a heavy table alone in the workshop.
All four legs have threaded rods which will lift table when rotated,
then it has sprockets and chain so all the legs move at the same time and it stays on level.










Here is Sketchup model of the table:
https://3dwarehouse.sketchup.com/model/ ... ght-adjust

o thats so freaking cool

That seems to be really nicely executed. Nice job!

How far does it move?

Probably best to attach your ground lead to the table top, rather than run current through the risers?

SusKatCas wrote: ↑Tue Sep 21, 2021 2:20 pm That seems to be really nicely executed. Nice job!

How far does it move?

Probably best to attach your ground lead to the table top, rather than run current through the risers?

Table top height is 2ft - 3,4ft or 0,6m - 1,04m
Yeah i have grounding on table top and top surface is cleaned from mill scale after those images.