Welding Cart, Material Cart, etc.
Posted: Thu Sep 01, 2011 10:00 am
Here are some welding projects. I made a welding cart out of scrap angle from a twin-tub stand and some 1/8" sheet. My Miller XMT304 is sitting on it now.
This is a material cart made from some scrap angle from old bed frames.
This is an enclosure for an ammeter to be installed between a home generator and the electrical service panel.
This is a material cart made from some scrap angle from old bed frames.
This is an enclosure for an ammeter to be installed between a home generator and the electrical service panel.