Page 1 of 1
Tig Torch Holder
Posted: Fri Feb 04, 2011 12:03 am
by sspracing
I made this tig torch holder so that I could move it around my welding bench. Now my holder is where I need it. I built it out of scrap metal, and added a couple of magnats, and kick stand, so that it wold stay up. Tig welded with my Maxstar 200 DX. Here are a few pictures.
- tn_IMG_20110125_151130.jpg (33.03 KiB) Viewed 5388 times
- tn_IMG_20110125_164638 - Copy.jpg (38.15 KiB) Viewed 5388 times
Re: Tig Torch Holder
Posted: Tue Apr 19, 2011 1:01 am
by pegleg1az
Verry nice holder...
Re: Tig Torch Holder
Posted: Fri Apr 29, 2011 9:41 am
by av8r
I used your idea and made one of my own. Back caps are broken a lot at our welding school because students hang the torch by the back cap. I deviated a bit and used available materials for the magnets. I used the magnets that attach to business cards and a heavy base plate. Our TIG torches are scratch start so I put a piece of PVC as a liner to prevent inadvertent arcing. My instructor didn't like that and found a piece of ceramic that just fits into the metal tube and supports the tip.
Re: Tig Torch Holder
Posted: Mon Oct 17, 2011 12:45 am
by TheExpert
You have done well job.
Re: Tig Torch Holder
Posted: Fri Nov 04, 2011 7:27 pm
by Airsickness
Made one for the torch at work.
Nice!
Re: Tig Torch Holder
Posted: Mon May 07, 2012 7:26 pm
by rsears
slick idea! I like that.
Re: Tig Torch Holder
Posted: Fri May 11, 2012 8:30 am
by Ultralow787
Very nice work and a great idea!