wife wants matching coffee table - Page 2

motox · Tue Mar 17, 2015 6:04 am

steve
thanks, i will look into it.
my wheel choice was govern by
color not material.
until you pointed out the issues
of PVC material wasn't and issue
thanks again for the heads up.
craig

exnailpounder · Tue Mar 17, 2015 5:38 pm

Hey Craig...how do your boards attach where there are no corners holding them down, screwed up from underneath? Sharp looking table!

motox · Wed Mar 18, 2015 6:01 am

jeff
plenty of #6x1/2" screws
4 rows of 15 plus several on outside
rails close to corners.
supports are predrilled and counterbored so
screw heads are flush.
craig

exnailpounder · Wed Mar 18, 2015 8:45 am

Gotcha....really nice work! I am having a slow day so I might go whip up a couple small tables...did you see the booby washer sculpture yet??

motox · Wed Mar 18, 2015 3:00 pm

jeff
did you see the booby washer sculpture yet??

no where is its.
craig

motox · Wed Mar 18, 2015 3:15 pm

jeff
found it
craig

exnailpounder · Wed Mar 18, 2015 5:47 pm

Its weird....somehow I am strangely aroused by the combination of metal, welding and boobies. I really do have a life you guys

motox · Sun Mar 22, 2015 8:28 am

jeff
here is the fastening pattern on the bottom of the first narrower
table i built.
craig

exnailpounder · Sun Mar 22, 2015 9:35 am

Craig...thats what I thought you were doing. I dado my boards and weld in a piece of strap to hold my boards in. I really like your corners though. I am going to get a press one of these days but sales have slowed down so I might wait even longer.

motox · Sun Mar 22, 2015 7:48 pm

jeff
for like five bucks you can make a small
corner fab brake
you can easily fab this up
craig