Plasma cart

Mihtu · Wed Mar 08, 2017 5:03 pm

On the cheap cart,first thing I ever built using tig,and aluminum!

dmcnally · Wed Mar 08, 2017 5:08 pm

Congratulations and nice job!

Dave

exnailpounder · Wed Mar 08, 2017 5:08 pm

Nice! Really like the pneumatic all terrains!

Mihtu · Wed Mar 08, 2017 5:10 pm

You know,I got tire of hitting a pebble with the mig cart,and almost dumping it,or a hose,etc,it does roll nicely

Glidertow · Wed Mar 15, 2017 2:11 pm

Nice job. What method did you use to bend the tubing?

Mihtu · Sun Mar 19, 2017 5:01 pm

I made a bender out of scrap to bend the 1/8th wall square tube,I saw a picture of one,and built what I saw in the picture,works pretty good !, You do need some preheat on the thicker wall tube though!

LtBadd · Sun Mar 19, 2017 7:46 pm

Mihtu wrote:I made a bender out of scrap to bend the 1/8th wall square tube,I saw a picture of one,and built what I saw in the picture,works pretty good !, You do need some preheat on the thicker wall tube though!

Would be very interested in seeing photo's of you bending the square tube

Mihtu · Mon Mar 20, 2017 11:48 am

I will post some pictures tonight,I am going to build a new mig cart,the one I have is a turd! So I will be bending some tubing for that one!