What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Basic small weldingtable..
Post Reply
jockewahlstrom
  • Posts:
  • Joined:
    Sun Jan 03, 2016 5:48 pm
  • Location:
    Hakkas, Sweden.

Hello!
After spending some time on youtube watching people build nice tables with lots of storage, tool holders and stuff,
i decided to make a really basic one:) Maybe i'll add just one or two holders for vicegrips;)

I'm going to add a detachable part that will be used as cutting-area but i will post that later..

measurements for tabletop are: 10*800*1250 (mm)
Attachments
image.jpeg
image.jpeg (64.75 KiB) Viewed 1960 times
image.jpeg
image.jpeg (63.03 KiB) Viewed 1960 times
image.jpeg
image.jpeg (44.56 KiB) Viewed 1960 times
image.jpeg
image.jpeg (66.3 KiB) Viewed 1960 times
image.jpeg
image.jpeg (39.09 KiB) Viewed 1960 times
image.jpeg
image.jpeg (47.64 KiB) Viewed 1960 times
perfect 90 degrees :)
perfect 90 degrees :)
image.jpeg (39.34 KiB) Viewed 1960 times
*TIG Welder : Stahlwerk 200P S AC/DC, 200Amp (german brand)
*MIG Welder : Big A*S old Kemppi, i don't know the model.
*Plasma cutter: Pela Cut 70P, 70A machine (cuts 20mm)
*Stick welder: Kemppi Minarc 150A
*A bunch of grinders and handtools.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Excellant work.
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar

Very nice.
Miller Bobcat 225
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Top
Timmontoya88
  • Posts:
  • Joined:
    Mon Feb 22, 2016 12:22 am
  • Location:
    Belen, NM

I would have never thought of adding bolts to help leveling the table. I'll keep that in mind when I upgrade to a weld / cutting table.
Thanks!
Top
jockewahlstrom
  • Posts:
  • Joined:
    Sun Jan 03, 2016 5:48 pm
  • Location:
    Hakkas, Sweden.

Timmontoya88 wrote:I would have never thought of adding bolts to help leveling the table. I'll keep that in mind when I upgrade to a weld / cutting table.
Thanks!
First of all; THANK YOU EVERYONE!


The leveling bolts are really helpful.. You can't tell by the pictures but i have welded a nut on the other side and i use the one shown in the pics as a counter nut to lock the bolt in place:)
*TIG Welder : Stahlwerk 200P S AC/DC, 200Amp (german brand)
*MIG Welder : Big A*S old Kemppi, i don't know the model.
*Plasma cutter: Pela Cut 70P, 70A machine (cuts 20mm)
*Stick welder: Kemppi Minarc 150A
*A bunch of grinders and handtools.
Top
Timmontoya88
  • Posts:
  • Joined:
    Mon Feb 22, 2016 12:22 am
  • Location:
    Belen, NM

jockewahlstrom wrote:The leveling bolts are really helpful.. You can't tell by the pictures but i have welded a nut on the other side and i use the one shown in the pics as a counter nut to lock the bolt in place:)
Ahhh now I really get it, I should apply that to my table I recently made (Out of scrap).
Top
Wade
  • Posts:
  • Joined:
    Thu Aug 25, 2016 1:31 am

jockewahlstrom wrote:
Timmontoya88 wrote:I would have never thought of adding bolts to help leveling the table. I'll keep that in mind when I upgrade to a weld / cutting table.
Thanks!
First of all; THANK YOU EVERYONE!


The leveling bolts are really helpful.. You can't tell by the pictures but i have welded a nut on the other side and i use the one shown in the pics as a counter nut to lock the bolt in place:)
I don't have pictures of mine, but I threaded some half inch plate that capped the legs. Then welded the bolt to a plate used to mount some heavy duty casters. My nut locks into that half inch plate.
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”