5thGearFab
- 5thGearFab
-
New Member
-
Posts:
-
Joined:Fri Mar 04, 2016 10:28 pm
Hey guys new to the forum. Have spent the last couple hours browsing thru posts and a lot of good work on here. Just wanted to post up a photo of a rear bumper I made for my Silverado. My original bumper was deteriorating away and I had the aluminum laying around and end product turned out really nice. made of sch 80 pipe, 3/8" flat bar for the mount and the mid section between the pipe. Expanded metal to add a nice look. I made this about 4 years ago and I didn't really take too many progress photos, just the final product. It's holding up good.
- Attachments
-
- image.jpeg (76.39 KiB) Viewed 892 times
-
- image.jpeg (56.61 KiB) Viewed 892 times
-
- image.jpeg (52.99 KiB) Viewed 892 times
-
- image.jpeg (34.08 KiB) Viewed 892 times
-
- image.jpeg (63.07 KiB) Viewed 892 times
Welcome to the forum. That's a nice looking bumper. Good job.
Cheers.
Cheers.
We are not lawyers nor physicians, but welders do it in all positions!
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Bumper looks great man! You just had happened to have some aluminum on hand? Looks like your in the dock making biz with all the aluminum on your rack. 
lol
lolPete
Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225