- tn_IMG_20110125_151130.jpg (33.03 KiB) Viewed 5399 times
- tn_IMG_20110125_164638 - Copy.jpg (38.15 KiB) Viewed 5399 times
I made this tig torch holder so that I could move it around my welding bench. Now my holder is where I need it. I built it out of scrap metal, and added a couple of magnats, and kick stand, so that it wold stay up. Tig welded with my Maxstar 200 DX. Here are a few pictures.
I used your idea and made one of my own. Back caps are broken a lot at our welding school because students hang the torch by the back cap. I deviated a bit and used available materials for the magnets. I used the magnets that attach to business cards and a heavy base plate. Our TIG torches are scratch start so I put a piece of PVC as a liner to prevent inadvertent arcing. My instructor didn't like that and found a piece of ceramic that just fits into the metal tube and supports the tip.
Perpetual stick/TIG welding student (or master of molten metal massacre)
Miller XMT304
TheExpert
- TheExpert
-
Workhorse
-
Posts:
-
Joined:Thu Sep 08, 2011 7:48 am
-
Contact:
You have done well job.
Airsickness
- Airsickness
-
New Member
-
Posts:
-
Joined:Wed Nov 02, 2011 8:36 pm
Made one for the torch at work.
Nice!
Nice!
Ultralow787
- Ultralow787
-
Guide
-
Posts:
-
Joined:Fri Apr 29, 2011 11:30 pm
-
Location:Ontario, Canada
Very nice work and a great idea!
Perfection is impossible, but if you strive for perfection, excellence is obtainable!
1983 Canox "Sparkler" 225 AC Stick Welder
Hobart 210 MVP MIG Welder
Harris "Spitfire" Oxy-Acetylene Set
1983 Canox "Sparkler" 225 AC Stick Welder
Hobart 210 MVP MIG Welder
Harris "Spitfire" Oxy-Acetylene Set