What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
took forever but its finished..(i think)
- Attachments
-
- IMG_1573cart mig 2.jpg (142.19 KiB) Viewed 1974 times
-
- IMG_1592 cart front.jpg (136.29 KiB) Viewed 1974 times
-
- IMG_1589 cart left side.jpg (154.24 KiB) Viewed 1974 times
-
- IMG_1588cart right side.jpg (139.78 KiB) Viewed 1974 times
-
- IMG_1587cart draw front.jpg (146.17 KiB) Viewed 1974 times
-
- IMG_1590 cart rear.jpg (148.17 KiB) Viewed 1974 times
-
- IMG_1586cart cooler tray.jpg (121.29 KiB) Viewed 1974 times
-
- IMG_1584cart tank mounts.jpg (134.04 KiB) Viewed 1974 times
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Nice cart, like the sliding plate for the cooler
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
That's a nice looking set up. Well done.
Cheers.
-Eldon
Cheers.
-Eldon
We are not lawyers nor physicians, but welders do it in all positions!
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
wes
figured i would show that photo before
someone asked how do i get the side door
on the mig to open with the welding rods
in the way.
the mig was an after thought on the cart.
craig
figured i would show that photo before
someone asked how do i get the side door
on the mig to open with the welding rods
in the way.
the mig was an after thought on the cart.
craig
- Attachments
-
- 10153150_639269576139797_783840256_n.jpg (75.95 KiB) Viewed 1931 times
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Nice! What are your shelf tops and slide top made from? Lots of thought went into that cart
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
ex
had a sheet of 1/8" 6063 alum i cut up
for shovels.
draw was from old desk in my work office
that i cut down.
connections from alum to steel are with riv-nuts.
craig
had a sheet of 1/8" 6063 alum i cut up
for shovels.
draw was from old desk in my work office
that i cut down.
connections from alum to steel are with riv-nuts.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
ex
truth being cart was designed for tig only but
half way through i realized i had enough room
to fit mig.. at that point plan A went to s##t and
the wing it factor came to play. lucky everything
fits. lol
craig
truth being cart was designed for tig only but
half way through i realized i had enough room
to fit mig.. at that point plan A went to s##t and
the wing it factor came to play. lucky everything
fits. lol
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Nice work. Its nice to do something for yourself once in awhile. I am trying to finish my new welding table but I am so busy welding I am using it unfinished. I am dying to try out my new Syncrowave 210 but can't find time. Friday it will happen! Keep them pics coming...this thread has gone cold
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Hey Craig...I see the Syncro 250...just wondering about the invertig...did you just want an inverter or does the 250 spin the electric meter to hard?
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
ex
wanted an inverter for the size and yes too
keep the meter from spinning so much
plus smaller foot print. i will be retiring
and moving my stuff to my other house
so if the inverter works out ill sell the
250. one less machine to move.
i have a garage full of stuff......
craig
wanted an inverter for the size and yes too
keep the meter from spinning so much
plus smaller foot print. i will be retiring
and moving my stuff to my other house
so if the inverter works out ill sell the
250. one less machine to move.
i have a garage full of stuff......
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities