What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
visionwelder
- visionwelder
-
New Member
-
Posts:
-
Joined:Sun Dec 05, 2010 7:56 pm
Probably not much. They're usually full of sand, muck and calcium and rusted out around the bottom. Find out how many gallons the tank holds then see if you can get that much in it. I'd bet your gonna be more than a few gallons short. Unless you cut the ends off the tank theres no way to get the crap out.visionwelder wrote:Just accuired a new old water heater. Any sharp ideas on what i could turn it into?? Thx.
If not, use it to build a still. All sorts of good stuff comes out of still's.
Highly skilled at turning expensive pieces of metal into useless but recyclable crap..
kermdawg
- kermdawg
-
Weldmonger
-
Posts:
-
Joined:Tue May 25, 2010 8:16 pm
-
Location:All over, mostly southwest USA
I take it its gas, so its got the flue built in the center of it? If its electric, you can turn it into an AWESOME smoker, my buddy built one from an old 100 gallon electric water heater. If you were real crafty, Im sure you could figure out how to make one from a gas water heater too. Might even be easier :p
You are gonna have to get that crap out of there somehow. The newer ones got a glass lining inside too. What happens with water heaters(why they leak most of the time) is that glass lining will get a crack in it from the heating and cooling(expansion and contraction) of the metal, which it turn leads to a rusting of the steel tank itself.
You are gonna have to get that crap out of there somehow. The newer ones got a glass lining inside too. What happens with water heaters(why they leak most of the time) is that glass lining will get a crack in it from the heating and cooling(expansion and contraction) of the metal, which it turn leads to a rusting of the steel tank itself.
Signature? Who needs a F***ing signature?
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities