Does anybody know where I can find these 3/4" X 3/4" Square tube balusters? I cant seem to find them and I have a very high dollar customer that wants some handrail built to match some existing stuff. If you cant see the picture they are 3/4" X 3/4" Square tubing with a belly rolled into the center of them. (Not a beer belly, more like a 3 month old pregnant belly). The original stuff is steel and I would prefer to go that route again. TIA for any input.
***Not sure why the picture came in sideways, sorry about that.
TraditionalToolworks
- TraditionalToolworks
-
Weldmonger
-
Posts:
-
Joined:Mon Dec 18, 2017 7:49 am
-
Location:San Jose / Kelseyville
Try King Architectural Metals, they have everything you will need, and then some.
https://www.kingmetals.com
https://www.kingmetals.com
Collector of old Iron!
Alan
Alan
You my friend are a life saver!!TraditionalToolworks wrote:Try King Architectural Metals, they have everything you will need, and then some.
https://www.kingmetals.com
TraditionalToolworks
- TraditionalToolworks
-
Weldmonger
-
Posts:
-
Joined:Mon Dec 18, 2017 7:49 am
-
Location:San Jose / Kelseyville
They might not have exactly what you're looking for, but you should call them as it's kinda difficult to find everything, even in the e-catalog. They have some balusters with bends, but not sure if they have the exact pot-belly style you showed.Farmbuilt wrote:You my friend are a life saver!!
If you're even luckier to live within driving distance to 1 or the 3 locations, that would be icing on the cake as you could save on shipping.
Collector of old Iron!
Alan
Alan