What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Beginner projects
Post Reply
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Well, first post on this forum, might as well introduce myself with some pictures.

I'm a beginner hobby welder and my mojo is to always practice on something that is useful. My first project was with a borrowed 120V flux core welder to build myself a work bench a year and a half ago. This led to me falling in love with welding and buying my own setup.
IMG_4473.JPG
IMG_4473.JPG (52.6 KiB) Viewed 6133 times
IMG_4520.JPG
IMG_4520.JPG (47.9 KiB) Viewed 6133 times
Once I got my new welder, I needed a rack for my steel stock, so made some small wall racks for it.
IMG_4849.JPG
IMG_4849.JPG (109.09 KiB) Viewed 6133 times
IMG_4871.JPG
IMG_4871.JPG (63.57 KiB) Viewed 6133 times
Then, I had to of course buy a band saw... and build a vertical portaband stand...
IMG_6334.JPG
IMG_6334.JPG (58.53 KiB) Viewed 6133 times
IMG_6331.JPG
IMG_6331.JPG (106.54 KiB) Viewed 6133 times
IMG_6364.JPG
IMG_6364.JPG (98.63 KiB) Viewed 6133 times
And then I was set to weld anything I could get my hands on.

A shock bleeding reservoir stand...
IMG_6366.JPG
IMG_6366.JPG (89.61 KiB) Viewed 6133 times
Night stand tables from reclaimed oak tops...
IMG_6066.JPG
IMG_6066.JPG (211.81 KiB) Viewed 6133 times
IMG_6283.JPG
IMG_6283.JPG (178.64 KiB) Viewed 6133 times
A console table from the same oak top and my old 26in MTB wheels.
IMG_6916.JPG
IMG_6916.JPG (211.55 KiB) Viewed 6133 times
IMG_7017.JPG
IMG_7017.JPG (132.66 KiB) Viewed 6133 times
My first aluminum project - a tuna fishing rod rack.
IMG_6861.JPG
IMG_6861.JPG (115.56 KiB) Viewed 6133 times
IMG_6906.JPG
IMG_6906.JPG (192.75 KiB) Viewed 6133 times
And finally a new welding cart, inspired by weldmonger himself.
IMG_7190.JPG
IMG_7190.JPG (156.46 KiB) Viewed 6133 times
Last edited by deni822 on Thu Jul 20, 2017 11:36 am, edited 1 time in total.
Top
Mike
  • Posts:
  • Joined:
    Mon Dec 06, 2010 1:09 pm
  • Location:
    Andover, Ohio

deni822, welcome to the forum.
M J Mauer Andover, Ohio

Linoln A/C 225
Everlast PA 200
Top
User avatar

Welcome to the forum
Nice fab work!
Richard
Website
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Thanks guys. Looking forward to learning from you all.
Top
OzFlo
  • Posts:
  • Joined:
    Sat Sep 26, 2015 10:16 pm
  • Location:
    Sydney, Australia

Nice work! Love the tables!
Top
richard parker
  • Posts:
  • Joined:
    Thu Jul 06, 2017 5:09 pm

good stuff!
Top
PhillerTime
  • Posts:
  • Joined:
    Tue Jan 24, 2017 1:15 am

Cool stuff! Great job!
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

Nice work. How did you weld the aluminum?

Sent from my SCH-I535PP using Tapatalk
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Simclardy wrote:Nice work. How did you weld the aluminum?

Sent from my SCH-I535PP using Tapatalk
Thanks guys.

Tig'ed it with the SW200. And finally installed it on my father in-laws blue fin tuna boat this past week.
tuna rod holder.JPG
tuna rod holder.JPG (56.95 KiB) Viewed 5721 times
Top
cj737
  • Posts:
  • Joined:
    Thu Sep 29, 2016 8:59 am

I am suspect of the strength of those rod holders. Typically, they're made form schedule 40 and fully welded down their sides. I couldn't see welds more than tacks at top and bottom. If they're only for use while running, then no big deal. But if your FIL trolls those reels from those holders, you could have a serious problem on your hand if they break and his $1,000 saltwater rig goes for a swim in the Atlantic...

Just saying-
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

cj737 wrote:I am suspect of the strength of those rod holders. Typically, they're made form schedule 40 and fully welded down their sides. I couldn't see welds more than tacks at top and bottom. If they're only for use while running, then no big deal. But if your FIL trolls those reels from those holders, you could have a serious problem on your hand if they break and his $1,000 saltwater rig goes for a swim in the Atlantic...

Just saying-
No trolling, just storage. No rack mounted to a fiberglass lip would hold an 800lb tuna... :lol:
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Finished another beginner project this weekend. Pretty happy how it turned out and my MIG technique is getting much better. There is no replacement for burning wire to get better that's for sure. Now we can creep on neigbours in style... :)
IMG_1457.JPG
IMG_1457.JPG (131.57 KiB) Viewed 4305 times
Top
homeboy
  • Posts:
  • Joined:
    Mon Dec 19, 2016 11:52 pm
  • Location:
    Southern Ontario Canada

Just curious if the table tops are made from oak van truck flooring? I have done work in a local plant that manufactures it and have heard of people finishing it but have never seen the end results. Whatever you used it all turned out very nice. :?:
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

homeboy wrote:Just curious if the table tops are made from oak van truck flooring? I have done work in a local plant that manufactures it and have heard of people finishing it but have never seen the end results. Whatever you used it all turned out very nice. :?:
No, I found some cheesy really old 70's or 80's coffee tables and just refinished and re-purposed them to these.
Top
User avatar
  • Posts:
  • Joined:
    Tue Mar 18, 2014 11:41 am

Great looking bench. I think you've just given me an idea. :idea:
Don't let what you cannot do interfere with what you can do.
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Thanks Tbaugh. Glad to give others ideas. I got this bench design and idea from someone else as well.
Top
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Looks great Deni, I like your work bench design. And that chair is very kool. :)

Pete
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

pgk wrote:Looks great Deni, I like your work bench design. And that chair is very kool. :)

Pete
Thanks Pete. Haven't been on here in a while, so just saw your post.

Cheers.
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Another beginner project finished. Posting to give some other beginners more project ideas.

Window well cover with escape hatch so the kiddos and doggos don't plunge into the pungie sticks.
IMG_3038.JPG
IMG_3038.JPG (137.46 KiB) Viewed 3812 times
IMG_3044.JPG
IMG_3044.JPG (144.54 KiB) Viewed 3812 times
IMG_3035.JPG
IMG_3035.JPG (158 KiB) Viewed 3812 times
Top
User avatar

Looks real good deni882
Richard
Website
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Thanks Richard.
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Finally finished a pirate chest that’s been a work in progress for a few months. Mild steel mig and tig welded with a black oxide finish and oak. Name tag was silicon bronze on mild steel.
IMG_2275.JPG
IMG_2275.JPG (48.4 KiB) Viewed 3670 times
7583878160__32A2346.JPG
7583878160__32A2346.JPG (108.45 KiB) Viewed 3670 times
IMG_3292.JPG
IMG_3292.JPG (93.37 KiB) Viewed 3670 times
IMG_3294.jpg
IMG_3294.jpg (94.88 KiB) Viewed 3670 times
Last edited by deni822 on Thu Jun 07, 2018 2:25 pm, edited 1 time in total.
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

And, here is one from last winter. A kitchen helper. 1in tubing and walnut scraps.
6174593296__32A1401.JPG
6174593296__32A1401.JPG (107.43 KiB) Viewed 3670 times
IMG_1772.JPG
IMG_1772.JPG (64.42 KiB) Viewed 3670 times
Top
cj737
  • Posts:
  • Joined:
    Thu Sep 29, 2016 8:59 am

deni822 wrote:And, here is one from last winter. A kitchen helper. 1in tubing and walnut scraps.
Just make sure that "helper" can't reach the liquor cabinet standing atop your handsome work ;)
Top
deni822
  • Posts:
  • Joined:
    Fri Jul 14, 2017 3:52 pm
  • Location:
    Calgary, Alberta

Time to start marking the bottles...
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”