What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Tressel Table
Post Reply
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

I recently ran across some reclaimed Douglas Fur a few weeks back for a somewhat reasonable price. It came off a dam when the dam was torn down and supposedly is around 90 years old. I'm not much of a wood worker but I wanted to try my hand at building an industrial table. Here is what I've come up with so far...
Attachments
20180117_185724[1].jpg
20180117_185724[1].jpg (33.91 KiB) Viewed 3841 times
20180120_160424[1].jpg
20180120_160424[1].jpg (36.66 KiB) Viewed 3841 times
20180120_160459[1].jpg
20180120_160459[1].jpg (39.6 KiB) Viewed 3841 times
Jake Burley
@burleyindustriesllc
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

a few more...
Attachments
I spent a ridiculous amount of time taking the mill scale off in order to try my hand with this metal finish system.
I spent a ridiculous amount of time taking the mill scale off in order to try my hand with this metal finish system.
20180115_201110[1].jpg (47.75 KiB) Viewed 3837 times
table top all glued up
table top all glued up
20180128_151003[1].jpg (62.6 KiB) Viewed 3837 times
underside mounting holes for the table top
underside mounting holes for the table top
20180117_212240[1].jpg (58.94 KiB) Viewed 3837 times
Jake Burley
@burleyindustriesllc
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

The base is tig welded with regular ER-70 but all the 'face' welds are silicon bronze.
Attachments
20180120_154118[1].jpg
20180120_154118[1].jpg (39.27 KiB) Viewed 3838 times
Jake Burley
@burleyindustriesllc
Top
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

That's going to be beautiful!
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

tungstendipper wrote:That's going to be beautiful!
Thank you!
Jake Burley
@burleyindustriesllc
Top
User avatar

Looking good, anxious to see how the metal finish turns out.
Richard
Website
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

LtBadd wrote:Looking good, anxious to see how the metal finish turns out.
Yeah me too. I've watched all there YouTube videos and it seems like really cool stuff. Hopefully it turns out good.
Jake Burley
@burleyindustriesllc
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

I'm back on the dinning room tressel table today. I'm really happy with the way the stretcher turned out. I brought it inside to get an idea of how it will look. I'm leaning towards just clear coating it. What do you guys think?
Attachments
20180317_161652.jpg
20180317_161652.jpg (34.83 KiB) Viewed 3552 times
20180317_161732.jpg
20180317_161732.jpg (40.73 KiB) Viewed 3552 times
20180317_161816.jpg
20180317_161816.jpg (36.42 KiB) Viewed 3552 times
Jake Burley
@burleyindustriesllc
Top
homeboy
  • Posts:
  • Joined:
    Mon Dec 19, 2016 11:52 pm
  • Location:
    Southern Ontario Canada

Very nice. I have a large oak live edge slab, router planed, that at some point I need to build the table undercarriage for. I was thinking of something along the line of yours and now I see how good it looks. The "rivet" look is distinctive and I wondered if you epoxied on short carrage bolts in pre drilled holes or used something different?
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Fantastic work. I not long finished a table for my Mother in Law, similar design but gloss black powder coating and an old door for the top.
Attachments
IMG_20171216_201230.jpg
IMG_20171216_201230.jpg (79.79 KiB) Viewed 3513 times
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Nice work Burls and Mick.
Mother in law hey?
If I was makin one for mine I would have used a dunny door.
What goes around comes around ;)


Sent using Tapatalk
Flat out like a lizard drinkin'
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Lol, a dunny door gave me the idea. This one was second hand so it may well be one. No malice intended with mine though
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

The table is almost complete. I ended up sending the base out to be painted satin black.
Attachments
20180405_204243.jpg
20180405_204243.jpg (41.83 KiB) Viewed 2789 times
20180405_204237.jpg
20180405_204237.jpg (32.92 KiB) Viewed 2789 times
20180405_204349.jpg
20180405_204349.jpg (57.19 KiB) Viewed 2789 times
Jake Burley
@burleyindustriesllc
Top
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

Looks beautiful!!!
Can you explain that pink workbench?
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

awesome table
how did you fasten those breadboard ends?
hope they are not glued end to end or it will cause
cross grain issues.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

The pink tool bench is my 2 young daughters. I try to give them projects to do while I'm out working.

The breadboard ends are drawboard mortis a tenon joints.
Attachments
20180225_144031.jpg
20180225_144031.jpg (55.54 KiB) Viewed 2775 times
20180319_160518.jpg
20180319_160518.jpg (45 KiB) Viewed 2775 times
Jake Burley
@burleyindustriesllc
Top
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

Burley Industries wrote:The pink tool bench is my 2 young daughters. I try to give them projects to do while I'm out working.

The breadboard ends are drawboard mortis a tenon joints.
Pretty soon you need to show them how to weld. :P
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

The breadboard ends are drawboard mortis a tenon joints.

very very nice way to finish an end without glue!!
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

Burley
how much off set did you use 1/16 or more?
i haven't done more of those in many years...
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
ljdm1956
  • Posts:
  • Joined:
    Wed Mar 19, 2014 6:29 pm
  • Location:
    East Durham, NY

C'mon now, for those of up here in this continent, ya gotta translate "Dunny Door"
Lincoln Weld-Pak 180
Lincoln spool gun
Everlast PowerUltra 205p
AHP AlphaTig 200X
Assorted stuff
Top
homeboy
  • Posts:
  • Joined:
    Mon Dec 19, 2016 11:52 pm
  • Location:
    Southern Ontario Canada

ljdm1956 wrote:C'mon now, for those of up here in this continent, ya gotta translate "Dunny Door"
Protector of privacy for Loo, can, crapper, john or outhouse.
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

motox wrote:Burley
how much off set did you use 1/16 or more?
i haven't done more of those in many years...
craig
Correct. 1/16" offset for the oak dowels.
Jake Burley
@burleyindustriesllc
Top
Burley Industries
  • Posts:
  • Joined:
    Fri Dec 15, 2017 4:43 pm
  • Location:
    Boise, Idaho

A few more of the finished shots. (Its also for sale just FYI)
Attachments
20180406_190043.jpg
20180406_190043.jpg (68.03 KiB) Viewed 2873 times
20180406_190027.jpg
20180406_190027.jpg (55.7 KiB) Viewed 2873 times
20180406_190015.jpg
20180406_190015.jpg (52.1 KiB) Viewed 2873 times
20180406_190135.jpg
20180406_190135.jpg (37.07 KiB) Viewed 2873 times
20180406_190155.jpg
20180406_190155.jpg (31.17 KiB) Viewed 2873 times
20180406_190220.jpg
20180406_190220.jpg (36.5 KiB) Viewed 2873 times
Jake Burley
@burleyindustriesllc
Top
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

You're a true craftsman. What a fine job. your finish work is impeccable!
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Top
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Why are you selling such a beautiful table? Awesome job man....


Pete
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”