wife asked for a grill for the new fire pit.
made it from stuff around shop.
- tungstendipper
-
Weldmonger
-
Posts:
-
Joined:Sun Nov 19, 2017 10:09 am
I think a nice rib eye steak would break it in nicely! Nice job!
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
MoonshinerPhD
- MoonshinerPhD
-
New Member
-
Posts:
-
Joined:Wed Jan 10, 2018 1:12 am
That's slicker than socks on a rooster right there!
As soon as I get my table welded up, I'm going to start on a vertical offset smoker to replace my old horizontal smoker.
As soon as I get my table welded up, I'm going to start on a vertical offset smoker to replace my old horizontal smoker.
great job on the grill work.after looking at your design i was thinking of how it would be if you made two grill so you could sandwich the meat in them and just rotate the grill. i have been thinking of making a sandwich type grill for my pit.i leave the lid open on my pit when grilling and just keep flipping the meat over but when i have 60+ chicken wings on it it sorta wears me out flipping them over so they dont burn.
I get hungry just looking at it , nice work Craig.
Just don't forget to put something with less thermal conductivity on the handle
Just don't forget to put something with less thermal conductivity on the handle
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
Fio
have only used it that one time so far. weather hasn't been nice enough
to try cooking on it. cooking grate has 3 height adjustments and i'm
going to add a expanded grate for charcoal soon.
grilling season is coming!
craig
have only used it that one time so far. weather hasn't been nice enough
to try cooking on it. cooking grate has 3 height adjustments and i'm
going to add a expanded grate for charcoal soon.
grilling season is coming!
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Looks awesome Craig, what are the dimensions of those side panels? We have a old Whalen fire pit that has seen better days, thinking about making something a little more heavy duty than a store bought one. 
Pete
Pete
Pete
Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Pete
6 1/2" at bottom, 16 1/2" on top, 13 1/2" vertical height. 11 ga sides 1/8" bottom
6 1/2" at bottom, 16 1/2" on top, 13 1/2" vertical height. 11 ga sides 1/8" bottom
- Attachments
-
- fire pit base.JPG (95.03 KiB) Viewed 2034 times
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil