Welding Tips and Tricks

I am locking for a new job and it is not going vary well. I have put numerous applications in and have not received any emails or anything if anybody knows of any re welder please let me know.

Thanks Matt

Try Indeed.com, lots of postings there.

quvit92 wrote:I am locking for a new job and it is not going vary well. I have put numerous applications in and have not received any emails or anything if anybody knows of any re welder please let me know.

Thanks Matt

What are you skilled at??
Process's/ Materials etc etc??

Flux core ,mig, tig,stick. I can do it all just have not used sub arc.
I have been welding 4140 tool still. I have dune ss and inconel and chromium just not a lot of it

Step 1. Create a short and sweet resume detailing what you can do and what skills you have and what weld processes you have used. Then there are the tests Plate(3g 4g) & Pipe(6g) are the main tests you will need to pass. Google welding resumes to get some ideas of what to put. You can pretty much guarantee a job if you can test out in 6g, pass a drug test, and aren't an illegal. There is a very high demand for pipe welders and fitters. I've had half a dozen industrial pipe offers in the last month, but my background is more aerospace/gas turbine. Plus I want to keep TIG welding.

Step 2. upload this resume to indeed.com and just start applying for positions that pertain to your skill set.

Step 3. Find out the details of the weld test, and Practice, Practice, Practice.


Check:

Indeed.com
workintexas.com
careerbuilder.com
tradesmaninternational.com
spencerogden.com
aerotek.com
metalskills.com
monster.com
rigzone.com

Sent a PM to you sir. But heres a job posting i know they are hiring at. This is for a pipe welder/structural welder/fitter position. Call and talk to luis. Weld test is 6" sch80 6g .035 (GMAW) mig root, .045 (FCAW) fluxcore fill and cap. Its a no a/c shop also.



Houston Vessel Manufacturing
16250 Tomball Parkway
Houston, Texas 77086

Tel: (713) 937-5299

quvit92 wrote:I am locking for a new job and it is not going vary well. I have put numerous applications in and have not received any emails or anything if anybody knows of any re welder please let me know.

Thanks Matt

There's a ton of work fitting your description in Baton Rouge. I'd have to assume the same exists in Houston, as the job market is level from Biloxi to Galveston.

It's worth buying a Sunday paper, as some jobs are not listed on line...

Steve S

Check the web site for Valmont Industries. I looked them up and they are hiring welders in some place called Brenhan, Texas. Valmont uses primarily 0.45 hard wire, spray transfer (gas mix around 95%-5%).

Here in the South Bend, Indiana area, there are loads of welding jobs. The cost of living here is very low.

I hope this is useful!

Where are you, and where can you travel to work?

I live near Greenspoint mall and I'll travel up to 50 miles one way

http://jobsearch.monster.com/search/Wel ... ton__2C-TX
this search was for "WELDER" in Houston TX.

http://jobsearch.monster.com/search/Wel ... ton__2C-TX
for welder-fitter.

http://jobsearch.monster.com/search/fab ... ton__2C-TX
"FABRICATOR" Houston, TX

Are you a qualified steam fitter?

steelworker / ironworker?

insulator?

No

And I am on all those

I am sorry.

I was laid off so many times, it's so hard.

Sorry to here that

well you know what they say.

"Better days are comin"

Yep