mig and flux core tips and techniques, equipment, filler metal
Greg From K/W
  • Posts:
  • Joined:
    Sun Nov 27, 2011 8:55 pm

I found this supplier here in Waterloo that will sell a 3' bottle of CO2 with no lease on the bottles. Was the cheapest I found around here. Look for a Linde dealer in your area. There we cheaper than Praxair who wants to lease you the tanks. Linde will just do a straight swap.

http://www.lindecanada.com/en/contact_a ... -maps.html
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

BTW,

How's your "SmashWeld" doing???
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Greg From K/W
  • Posts:
  • Joined:
    Sun Nov 27, 2011 8:55 pm

I have to buy a whole new gun for it. The gun is pooched. They tore it apart and screwed up the part that the tip screws into. Also the piece that the shield screws onto is buggered up too. So the guys at Linde sourced a new one for me. Its going to run me about $130 for the gun. Then I want a tank of 75/25 argon for it. Little more money than I wanted to spend to get it going but I think it will be a great welder when I get it working.
Post Reply