Page 1 of 1
110 mig working good
Posted: Wed Nov 27, 2013 11:33 pm
by jwmacawful
i had to install those handcuff rings i fab'ed the other day but didn't want to push the ancient idealarc for a 1/4 mile so i took the 110. it did ok till the last piece when the breaker blew. instead of grinding the paint off all the spots i had to weld i should have ground one and welded and then while the breaker was cooling off ground the next.
Re: 110 mig working good
Posted: Thu Nov 28, 2013 12:31 am
by Otto Nobedder
That's wonderful!
You welded those cuff rings using a 115V portable?
Thats Irony! Handcuff rings done with a portable welder!
Steve S
Re: 110 mig working good
Posted: Thu Nov 28, 2013 12:57 am
by jwmacawful
Otto Nobedder wrote:That's wonderful!
You welded those cuff rings using a 115V portable?
Thats Irony! Handcuff rings done with a portable welder!
Steve S
with both mig and 110 stick. not at the same time though.