mig and flux core tips and techniques, equipment, filler metal
1/2" mild steel--amps and volts settings
Post Reply
Rem40xb1
  • Posts:
  • Joined:
    Tue Dec 26, 2023 6:30 am

Mig settings for 1/2" mild steel--Amps and Volts Lincoln ultracore SR-12 .045 wire---any suggestions?
Top
cj737
  • Posts:
  • Joined:
    Thu Sep 29, 2016 8:59 am

I’d be around 385-400IPM and roughly 315 amps but in spray mode. I wouldn’t run that thickness in short circuit. I’d start there and dial it in per your mileage.
Top
Rem40xb1
  • Posts:
  • Joined:
    Tue Dec 26, 2023 6:30 am

Thank you I will try that
Top
Post Reply

Return to “Mig and Flux Core - gas metal arc welding & flux cored arc welding”