Which Type 240V Plug?
Posted: Wed Apr 12, 2023 10:16 pm
Which type power cord plug does Miller use on their Multimatic 255 machine? Thank you.
Which type power cord plug does Miller use on their Multimatic 255 machine? Thank you.
Welding Tips and Tricks
The Forum
https://forum.weldingtipsandtricks.com/
Which Type 240V Plug?
https://forum.weldingtipsandtricks.com/viewtopic.php?f=6&t=17074
Page 1 of 1
Which type power cord plug does Miller use on their Multimatic 255 machine? Thank you.
Re: Which Type 240V Plug?
Posted: Fri Apr 28, 2023 2:30 pm
Be use the machine is capable of single or 3 phase power, generally the plug is not included. You decide what power supply to wire for.
If you’re only running it on 240v I use Nema 6-50 plugs on my Millers.
If you’re only running it on 240v I use Nema 6-50 plugs on my Millers.
Re: Which Type 240V Plug?
Posted: Fri May 05, 2023 1:36 am
Thank you for replying cj737.
To update this thread, I have found the correct cord adapter and I will post the link below.
The dryer 240V receptacle is a NEMA 10-30. The Miller machine plug is a NEMA 6-50.
https://www.amazon.com/dp/B08CXR7NPJ
To update this thread, I have found the correct cord adapter and I will post the link below.
The dryer 240V receptacle is a NEMA 10-30. The Miller machine plug is a NEMA 6-50.
https://www.amazon.com/dp/B08CXR7NPJ
Re: Which Type 240V Plug?
Posted: Sun May 28, 2023 11:54 am
I use a Nema 6-50. I have seen several different plugs used. I picked the 6-50 and use it on all my stuff. I use and adapter for the 20 amp 220 things.