- E30C67EB-A447-489B-98CB-DBA86351A7CA.jpeg (83.78 KiB) Viewed 1415 times
- E30C67EB-A447-489B-98CB-DBA86351A7CA.jpeg (83.78 KiB) Viewed 1415 times
Can anyone tell me how to set up the Lincoln LN 25 wire feeder to run off the miller Bobcat 225. How exactly do all the setting need to be. I’ve tried a few different ways myself and it doesn’t seem to have any penetration. Picked the LN 25 up for $200 and it seems to work just not getting any penetration out of it. Last I tried setting the bobcat on dcep turned all the way up and connecting the ln25 to the electrode lead. Switch on the inside of the ln25 both to cv and cc and doesn’t seem to make it any better or worse. I also tried it on the wire setting with similar results. Any help would be appreciated.
- Attachments
-
- 48057A61-20BF-4CA4-AF9F-775322EDBA8A.jpeg (54.56 KiB) Viewed 1415 times
-
- B98B38E9-0EE7-4577-8E24-B0DB00170FE3.jpeg (51.73 KiB) Viewed 1415 times