Welding Tips and Tricks

Hi,

After struggling with a MIG problem, It looks like the root of the problem is the gas.. I'm using C2 for SS welding.. 0.030 , 316L. When I push the trigger, the wire slowly burn and drop, with a lot of soot.. After trying many different setting, with no luck at all, I took my autoweld bottle, hook it up for a test and it works perfectly.. Hooked back the C2, same problem again..

Anyone has an idea ? Could it be a bad mix in the bottle ?

thanks,
Marc

I think SS mig needs 98% Argon or 100%. Or a tri mix.

Yes you need trimix for ss


Sent using Tapatalk

Coldman wrote:Yes you need trimix for ss
Sent using Tapatalk

Or C100.