Page 1 of 1
Miller 211 vs Lincoln Power mig 210
Posted: Wed Oct 19, 2016 5:10 am
by RonLyke
I'm planning to upgrade from my Millermatic 135 mig machine, and am undecided between the Miller 211 and the Lincoln Power mig 210 (maybe others I don't know about. I don't want to go too far over $1000.00. (Side note: I have a Square Wave 200, so the tig feature of the Power Mig 200 isn't important.)
May I have some opinions?
Thanks.
Re: Miller 211 vs Lincoln Power mig 210
Posted: Wed Oct 19, 2016 10:41 pm
by Farmwelding
Since you can tig and stick with your squarewave, I'd go with the 211 to save a little money. Thy are both pretty good machines but I've never had a first hand encounter with the 210mp, just the 211 and I like it.
Re: Miller 211 vs Lincoln Power mig 210
Posted: Thu Oct 20, 2016 4:13 pm
by RonLyke
Thanks.
Re: Miller 211 vs Lincoln Power mig 210
Posted: Thu Oct 20, 2016 8:32 pm
by rahtreelimbs
I used a 211 several months ago. Real nice machine. It also runs a spool gun very well.
Re: Miller 211 vs Lincoln Power mig 210
Posted: Fri Oct 21, 2016 9:32 am
by Antorcha
Get the real 211, not the ToyzRus model