Hey Guys
Long time lurker first time poster.
I have a kitchen hood to weld that is 18 guage 430 stainless
I never attempted to mig 430 before
I am having a hard time finding a small spool of 430
Also it looks like i need trimix for a shielding gas
Any help would be appreciated
Thanks'
Bill
For the love of everything, TIG it. Don't MIG it.billb wrote:Hey Guys
Long time lurker first time poster.
I have a kitchen hood to weld that is 18 guage 430 stainless
I never attempted to mig 430 before
I am having a hard time finding a small spool of 430
Also it looks like i need trimix for a shielding gas
Any help would be appreciated
Thanks'
Bill
if there's a welder, there's a way
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Better question...What the hell is 340 stainless or 430 stainless or 034 stainless or 403 stainless and what wire do we use?Olivero wrote:Aw Gawd!
Well............................... Are you good at Migging stainless?
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
http://www.harrisproductsgroup.com/~/me ... ection.pdf
430 listed top row second from the left
Edit: Oscar originaly posted this chart
430 listed top row second from the left
Edit: Oscar originaly posted this chart
I have more questions than answers
Josh
Josh
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
We used to use 347 ss on gas turbine assemblies that would see heat. Exhaust duct and associated items. I don't know if that was the classification of the wire and the base metal or just the wire.