- This is the original gun that is rigged
- IMG_2940.JPG (37.92 KiB) Viewed 515 times
How the new is wired
- How the new gun is wired
- IMG_2941.JPG (25.87 KiB) Viewed 515 times
I purchased a new mig gun http://weldingdirect.com/00bi14kstmig1.html and hooked it up and went to turn the mig machine on and got nothing. I don't have a multimeter at the house so I have to wait till Monday to get one from work. I might have needed to get the double wire trigger instead of the single wire but I was not sure since the original gun was rigged.
How the new is wired I really need this thing to work so any help is greatly appreciated.
How the new is wired I really need this thing to work so any help is greatly appreciated.
I checked the voltage on the other side of the on/off switch and it has voltage. So now I really don't know what it would be.
I don't really know where to check next. I checked the voltage going to the relay and it has voltage. I really don't know where to measure the voltage next any help please!!! I need this rig to work I have welding to do on my truck and I also have to weld some stainless steel. Help please!!!
I can take more pictures if needed.
I don't really know where to check next. I checked the voltage going to the relay and it has voltage. I really don't know where to measure the voltage next any help please!!! I need this rig to work I have welding to do on my truck and I also have to weld some stainless steel. Help please!!!
I can take more pictures if needed.