[nativebroncofan]

I am wondering if anyone knows of a mig gun that has a trigger lock on it like say one that a drill has????
With over 5 feet of mig weld going into a single piece that trigger is becoming a part of my hand.
Any one know of one or even heard of one?
Thanks in advance, nativebroncofan

[delraydella]

My old 30a spoolgun had a trigger lock, but I don't recall seeing one on my new one. (Old one got stolen). If you can find a spoolgun built around the mid 90's, it would most likely have one. I'll look at mine tomorrow and see.

[nativebroncofan]

Cool thanks,
I've been trying to dream one up that could be used, just kinda hard when you're always being pushed for production.
nativebroncofan

[weldin mike 27]

Hi there,

Bernard make guns with trigger lock. Check this out.
http://www.bernardwelds.com/products/se ... figurator/

I use benard guns at work and they are great.

Hope this helps
Mick

[delraydella]

The new spoolgun didn't have a trigger lock.

If you find an older one, it may use the compression style tips, as opposed to the newer screw-in type. I still have about 20 of the old style tip for .035 if you want them.