![Laughing :lol:](./images/smilies/icon_lol.gif)
mig and flux core tips and techniques, equipment, filler metal
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
It separates the men from the boys
There are a lot of features on the 350MP but once you learn them, they will actually help you. Take setting "40" I believe it is, it will adjust the setting to compensate for your stick out and angle so you in theory will constantly have the same amperage. Then there is the aluminum settings, fun stuff!!
-Jonathan
![Surprised :o](./images/smilies/icon_e_surprised.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Well for some reason, I am still drawn to the Miller, even if it costs more... For me, they even LOOK better! Many have plugged the Lincoln, but I'm a Miller guy .... just like I'm GM not Ford fan!
The 350P has all I need/want. Now if I can just find a good used one. The potential deal I have on the Invision 352MPa Plus package is about the same price as a new 350P Just a step up!!!
The 350P has all I need/want. Now if I can just find a good used one. The potential deal I have on the Invision 352MPa Plus package is about the same price as a new 350P Just a step up!!!
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
The more time I spend trying to decide on just what I want or can get, the more options I try to rationalize... currently I am directing my interest towards a used XMT 304CC/CV or XMT 350CC/CV ($1000-$1400) and possibly a new 24A wire-feeder with the Bernard Q-gun (951195 ~$1800).
The new 24A with digital readout and pre/post flow and spot control (951195) is cheaper than adding the field upgrades to the base 24A ($1320)/22A ($1040) ... I like the idea of having the digital display... 24A has the 4-roller feed.
Field upgrade module costs:
A used Invision 352MPa/S-74MPa Plus package is also under consideration, but price and sales tax are issues... probably closer to $4K
The new 24A with digital readout and pre/post flow and spot control (951195) is cheaper than adding the field upgrades to the base 24A ($1320)/22A ($1040) ... I like the idea of having the digital display... 24A has the 4-roller feed.
Field upgrade module costs:
- Voltage control - $150 (included in 24A)
- Run-in control - $272 (included in 24A)
- Preflow/Postflow and Spot Control - $291
- Digital display - $498
- Optoma pulse control - Used $???
A used Invision 352MPa/S-74MPa Plus package is also under consideration, but price and sales tax are issues... probably closer to $4K
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Finally made a decision... I found a rather pristine 2008 MM350P with an XR-AlumaPro gun for less than $3K
Time to start looking for a deal on a Bernard Q300
Time to start looking for a deal on a Bernard Q300
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
You are in luck! I have a brand new one I want to sell, pm me and we will strike up a deal!!!GlenC wrote:Finally made a decision... I found a rather pristine 2008 MM350P with an XR-AlumaPro gun for less than $3K
Time to start looking for a deal on a Bernard Q300
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
The MM350P is here! I had to switch to 230V ... looked pretty clean inside .... once I get a steel gun... I can burn some wire... That 6/4 power cord was a bear to get the NEMA 6-50P plug on! Time to get a longer cord on it, maybe a 25ft 8/3
![Image](http://tapatalk.imageshack.com/v2/14/09/11/4c374607361c5c78dab87ace7054e036.jpg)
![Image](http://tapatalk.imageshack.com/v2/14/09/11/a8f4fe052c977dedbf0e25b29109623d.jpg)
Sent from my SM-G900V using Tapatalk
![Image](http://tapatalk.imageshack.com/v2/14/09/11/4c374607361c5c78dab87ace7054e036.jpg)
![Image](http://tapatalk.imageshack.com/v2/14/09/11/a8f4fe052c977dedbf0e25b29109623d.jpg)
Sent from my SM-G900V using Tapatalk
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Looks very clean Glen! Now lay down some beads for us!!!
-Jonathan
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Going tomorrow to look over remaining stuff... got the MM350P from a business closing... Supposed to be able to get some spools of wire and the rest is unknown... they have to be out in 2-weeks...
If they have some aluminum wire, I have Argon, so I'll be able to run some aluminum beads and some Pulse!... I hope they have a Q300 laying around...
Now the next issue is GASSES......
If they have some aluminum wire, I have Argon, so I'll be able to run some aluminum beads and some Pulse!... I hope they have a Q300 laying around...
Now the next issue is GASSES......
- I have Argon for the TIG, may need to consider going to a T bottle.
I have C25 and will need to stay with that
I will need to get 90/10 or 98/2
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Time to edit the sig line bro...
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Return to “Mig and Flux Core - gas metal arc welding & flux cored arc welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities