[buggsy]

welding (20).jpg (48.3 KiB) Viewed 735 times

welding (17).jpg (38.32 KiB) Viewed 735 times

This is three passes with LN 25 Ironworker loaded with .045 E71T-11 wire. 200 amps, DECP, 238 WFS, 3-arc force, 1-balance. Took a good 1/2 hour to dial in to what you see here. Is this OK, or do I need more adjusting?

Buggsy

[cj737]

Heat looks right, travel speed looks erratic.

[Mike Westbrook]

What does it do with the wire speed a little closer to 260 -280 not sure why but that sounds a little slow to me for the amperage

Sent from my XT1254 using Tapatalk