[CraigLam]

I just bought this one today.

[Citroën]

I'm running a Migatronic Automig 183 MPS, and a Migatronic Sigma 300 Pulse at home - At job i run a Migatronic KDO 325 and some ESAB LAN 315/ESAB LAX 380
The machines are probably not known in the US.

A little edit;
The Sigma 300 are traded in for a new Sigma² 400 watercooled machine - Can't wait.

Have used the machine for about a week now - Damn, that thing runs
Sigma² 400 CV, Intelligent Gas Control kit, "Special" software package, Pulse panel.
Specs: http://www.migatronic.com/media/leafletsuk/52170032.pdf

Pricetag ~ 16.000$

[CraigLam]

Citroen, talk about nice. That's alot like the millermatic.

[pscampsr]

I am also new here. I have a Clarke 190en that I use for fluxcore (it can do gas) and a Thermal Arc Fabricator 181i (mig/stick/tig) inverter machine. I have just had it for a couple of weeks and haven't yet worked in stick or tig with it. I really like the consistent arc and the quality drive.

[weldin mike 27]

Cool , welcome to the groups, feel free to post about anything, questions projects. No matter how basic or small.

Mick

[ImMark]

Hobart Handler and it's pretty nice within it's limits (like any other 110V machine)

[fisher]

A WIA 150S for general steel work and a Kempi 350 Fast MIG pulse for Ally. Both are fabulous and easy to use machines.
And I don't work for either of those companies lol.

[LesNewell]

I recently bought a Portamig 285HD to replace my old Miller 150. It is a much nicer machine and so much smoother than the Miller. Portamig are a fairly small UK company that make welders to order. They are basic transformer welders but they are really well built.

[Otto Nobedder]

I have to wonder, if they make transformer welders to order, if they're not 100% copper wound? All the big makers have at least partly aluminum-wound transformers, and I always found the old copper-wound machines, like the Lincoln Pipeliners that are like gold on e-bay, to weld much smoother.

I suppose if I ever win the Powerball, I'll contact a company like that and have a silver-wound machine built!

Copper is a more efficient conductor than aluminum, and silver is the most conductive of the metals at normal temperatures. I'd have to have one made just to see. (And to say, "Yours is a what? Well, mines a... )

Steve S

[delraydella]

With a silver wound machine, you could start your own line of high end signature welders.....The Nobedder series... your tagline could be..."cause there is Nobedder!"


I'll start working on the set for your infomercial.

[Otto Nobedder]

I'll start working on the set for your infomercial.

LMAO!!!

I can't wait to scream, "BUT WAIT!"

[semihemi]

i bought a used Lincoln idealarc 180 ... i learned on a hi dollar miller at my tech school but this one is good as gold

[chazmik]

I have a hobart 175 handler and this thing is great,a friend has a htp mig and it goes just fine but i was wondering if he needs a part can he run down the road for it like i can...........But i do have my eye on the htp221...........

[MojaveCliff]

I bought the HTP MIG 200. Put a 220 line in my garage and am one happy camper. A friend at work who is NHRA certified has had HTP for 20 years with no issues. The price was right for me, a bit less money than machines with similar capacity from other mfgrs. HTP literature says they are copper wound transformers vs competitor's aluminum wound units. I have to say, before looking at this welder's power supply, I had never see a transformer wound with what looks like sixteenth by eighth inch copper strip. One nit- the wire speed control is too easy to turn. Just touch it with the fuzz on a glove and it moves an increment. I'm a learner and not an experienced welder but I am happy with what this thing does.
Bought a Viking auto darken helmet, a cheap flame proof green jacket (reflects a lot of light into the helmet), 10 lb .030 and 10 lb .025 wire and, a 55 CuFt gas bottle. Wish I got the 88 CuFt. As an outsider looking in until now, I am having a blast using this thing and- finally being able to to no shit fab at will.
Years ago a buddy brought his harbor freight flux core machine over to fix my VW bus door hinge mount. The performance of that box convinced me to never by a cheap welder. It got it done but it as a pain. Sounded like series of pops and the welds looked the same. I like my machine. Like this forum too. A fellow jeeper told me about welding tips and tricks- best I've found. Life is good.

[Otto Nobedder]

A tip on dials that turn too easy...

I like to stuff a little self-adhesive felt pad under the knob to add a little drag without making it tight.

I'll have to remember about HTP being copper-wound next time I'm in the market.

Steve S

[WerkSpace]

I have a pair of Millermatic 210 welders.
The first was bought on consignment from Weldco for $1200.
The second was bought from the metal recycler as parts for $40.

As far as MIG welders go, these are a pretty good investment.
I also have the spool gun that I bought on eBay for $300.
http://www.millerwelds.com/om/o1325k_mil.pdf

[Otto Nobedder]

I see the box of kitchen matches... Is that for preheat?

And, looking to the left of the welder, I'll say something I don't normally say to a man... Nice rack!

[WerkSpace]

The photo is from the internet, but same machines as I own. (Too lazy to take my own photo.)

I see the box of kitchen matches... Is that for preheat?

[reddtigger]

hi all. new to welding in general. played around with some 110 stuff years ago, just coldwelding the crap outta junk cars.. learned a boatload here on this site. thanks for having it !!!

Just got a MILLERmatic 212 W/ autoset and the Spoolmatic 200 spool gun. now i need to install another 230 outlet and get some gas.. the bottles around here (southern maryland) are very expensive.. best price so far is an 80cuft of ARG/CO2 for $175.00...

Looking forward to enjoying this machine soon enough

FRONT OF MILLERMATIC 212 AS

MILLER FRONT.jpg (46.21 KiB) Viewed 2177 times

[Otto Nobedder]

Nice!

In all these years, that's the first time I've seen the face of an "autoset". I didn't realize you don't have to use an auto setting, so once you gain experience you can dial it for exactly what you need, rather than what the machine thinks you need.

If you want to own (rather than lease) a bottle, they're available on Craigslist, but you need to understand the certification date codes, or your "bargain" might need recertified in a month. Leasing from a supplier is a good choice as there's no waiting for fill; They handle the certification, and simply exchange the bottle, like old ten-cent-deposit soda bottles.

If you would rather "own", I can explain the date-stamps for you.

Steve S

[reddtigger]

I actually called the LWS today and found out renting is not overly expensive. $49.00 a year to rent and $43.00 for the gas. This is for a 140cuft cylinder. (I think he said 140, could have been 160cuft) so my initial out lay is under a Hundred.. and It's almost double capacity what the 80cuft bottle is for only a couple dollars more per fill..

One of the techs I work with said that his 150cuft cylinder is just about a large roll of wire so it makes consumable monitoring easier.. We'll see..

I had the option of going with just about any welder, I chose the 212 due to it's larger duty cycle and spoolgun package makes it ideal to start with aluminum right away..

Once I get the infrastructure to start welding, I'm sure I'll be asking questions and look forward to any help I can get.. Local community college does offer a welding class, but the cost is considerable for not being a full time career choice.. (maybe one day ! )

[Otto Nobedder]

Ask anything you want,

And, if you own the welder you want to learn, you'll learn more from Jody's videos for free than any community college can teach you for money.

Welcome to the community.

Steve S

[echosixmike]

Lincoln PowerMIG 300. I have a Python push-pull gun but haven't used it nor set it up, ever. One of these days I'll have to use it, if just to say I did. S/F.....Ken M

[Wobulate]

MIGS,

New Here-What MIG machines are you guys running?

Millermatic: 251
Miller Spoolmatic: 30A
Millermatic: XP-130

Wob

[Wobulate]

Lincoln PowerMIG 300. I have a Python push-pull gun but haven't used it nor set it up, ever. One of these days I'll have to use it, if just to say I did. S/F.....Ken M

MIGS
Millermatic: 251
Miller Spoolmatic: 30A
Millermatic: XP-130

Wob