Welding Tips and Tricks

My work place is currently using Weldman Model WE301T (attached is the specs for the machine) welding machine to weld inconel and there will be another welder coming next week and I had to get another machine for him. Since I'm going to buy a new machine, I was wondering if anyone can help to recommend any ESAB brand welding machine that had the same or better specification as the Weldman Model WE301T?

Not sure your location, but ESAB had a brand new machine out. 301I. Might for the bill. http://www.esabna.com/us/en/news/latest ... bility.cfm

Hi Soutthpaw,

Thanks for the reply, I'm from Singapore and currently looking up at ESAB Asia website and found Origo seems to be the machine I can use but I'm not sure which machine fits the one that I already have or even better, below are the links to the machine:

http://www.esabasia.com/asia/en/product ... ode=430595

http://www.esabasia.com/asia/en/product ... ode=430760

Do you have any advice?

shinya21 wrote:Hi Soutthpaw,

Thanks for the reply, I'm from Singapore and currently looking up at ESAB Asia website and found Origo seems to be the machine I can use but I'm not sure which machine fits the one that I already have or even better, below are the links to the machine:

http://www.esabasia.com/asia/en/product ... ode=430595

http://www.esabasia.com/asia/en/product ... ode=430760

Do you have any advice?

I would go for the 4300i. It looks like the most available amps and has DC pulse

Thanks for the recommendation