Hi all,
I did say that I would tell what happened when I bought my RTech welder...
Now it's resolved, I can tell all..
Like a good little shopper, I got the best price off the internet before I went to buy my welder...
I went in, and they reduced the price to £840, at which point I said:-
" but there is one up at £799 on eBay..."
And quick as a flash, they responded :-
" Yes, but the one we will sell you for £840 is not stolen!"
Turns out that the "best deal" on eBay was actually a machine that was stolen from them a few days earlier!
They knew all about it and were assisting police.....
Bullet dodged there then...
I paid my £840, and was very happy...
So - there you go - the moral of the story-
Buyer beware! That good deal is not necessarily...
Sometimes it's best to do the deal face to face with the manufacturers and designers of the kit in their headquarters ( as is the case with RTech )
Have a good one.
Mike.
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Captainbeaky
- Captainbeaky
-
Workhorse
-
Posts:
-
Joined:Fri May 29, 2015 6:00 pm
-
Location:Madeira, Portugal
Here in the USA, if it ever came to light that it was stolen goods and had been reported as such, you could loose it at the very least.
You could also be charged as having taken possession of stolen goods, trafficking in stolen goods, and possibly other offenses, particularly if you knew it to be questionable or that it was stolen.
I am not a law enforcement officer or lawyer, so do take this with a few grains of salt, but it is what I have been lead to understand.
That all said, it's definitely a hard area to negotiate, as there aren't any easily accessible lists of serials of stolen equipment that you can check used gear against.
You could also be charged as having taken possession of stolen goods, trafficking in stolen goods, and possibly other offenses, particularly if you knew it to be questionable or that it was stolen.
I am not a law enforcement officer or lawyer, so do take this with a few grains of salt, but it is what I have been lead to understand.
That all said, it's definitely a hard area to negotiate, as there aren't any easily accessible lists of serials of stolen equipment that you can check used gear against.
-Josh
Greasy fingered tinkerer.
Greasy fingered tinkerer.
Yeah it's nearly impossible to say if it's stolen, specially abroad..
But i wouldnt buy a welder from eBay anyways, i like em brand new from a store, or used by someone i know.. Dont want to spend 1000$ on a welder that is broken.. Trust issues maybe
But i wouldnt buy a welder from eBay anyways, i like em brand new from a store, or used by someone i know.. Dont want to spend 1000$ on a welder that is broken.. Trust issues maybe
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
So did they manage to catch the eBay seller with the hot goods?Captainbeaky wrote:Hi all,
I did say that I would tell what happened when I bought my RTech welder...
Now it's resolved, I can tell all..
Like a good little shopper, I got the best price off the internet before I went to buy my welder...
I went in, and they reduced the price to £840, at which point I said:-
" but there is one up at £799 on eBay..."
And quick as a flash, they responded :-
" Yes, but the one we will sell you for £840 is not stolen!"
Turns out that the "best deal" on eBay was actually a machine that was stolen from them a few days earlier!
They knew all about it and were assisting police.....
Bullet dodged there then...
I paid my £840, and was very happy...
So - there you go - the moral of the story-
Buyer beware! That good deal is not necessarily...
Sometimes it's best to do the deal face to face with the manufacturers and designers of the kit in their headquarters ( as is the case with RTech )
Have a good one.
Mike.
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Generally, if you bought it "in good faith", meaning you had no reason to suspect the item was not being represented honestly, you are not criminally liable, meaning you would not be charged with a crime. However, the stolen property is forfeit, and your only recourse to be reimbursed is to sue the seller for damages. Since the seller is a criminal, your odds of ever seeing a cent in restitution are extremely slim.
Caveat Emptor.
Caveat Emptor.
Captainbeaky
- Captainbeaky
-
Workhorse
-
Posts:
-
Joined:Fri May 29, 2015 6:00 pm
-
Location:Madeira, Portugal
It's the same here in the UK.
If I did buy it - and I did actually get the welder, it is not actually my property, so I'd lose it...
Thing is, it looked exactly like an R-Tech reseller.
I haven't dropped back into Rtech to see if they got their kit back or not - I'll pop in next week and see...
I remember going to buy a bike - BMW R1150GS.
Bike was fine, but when I checked the history, it had outstanding finance - another bullet dodged there...
If I did buy it - and I did actually get the welder, it is not actually my property, so I'd lose it...
Thing is, it looked exactly like an R-Tech reseller.
I haven't dropped back into Rtech to see if they got their kit back or not - I'll pop in next week and see...
I remember going to buy a bike - BMW R1150GS.
Bike was fine, but when I checked the history, it had outstanding finance - another bullet dodged there...
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities