Page 1 of 1
ESAB 2200i settings
Posted: Sun Jun 21, 2015 3:56 pm
by Greg77
Hi, new to the forum and would like some advise. Own an ESAB 2200i and been looking for a site or refence information about ideal settings for different applications. Basically a guide to basic settings for this machine both with gun and foot pedal operation, pulse and continuous. A this stage only really need to to start on steel mainly automotive body metal specifically. My problem is being a European unit all the guff is in foreign languages which is not much help to an Ozzie block. Can anyone assist please.
Regards, Greg
Re: ESAB 2200i settings
Posted: Sun Jun 21, 2015 4:44 pm
by weldin mike 27
ESAB is an international company, so you should be able to find the literature online somewhere in English
Re: ESAB 2200i settings
Posted: Sun Jun 21, 2015 7:53 pm
by Oscar
Type the following into Google:
esab 2200i english manual filetype:pdf
You're welcome.
Re: ESAB 2200i settings
Posted: Tue Jun 23, 2015 2:45 pm
by VooDoo
2200i dc OR acdc machine? what panel? Ta33 or ta34?
http://manuals.esab.com/Templates/T119. ... n=frameset
Here you will find manuals, for the machine and panels. Setting up welder will be in the panel manual.
Find right machine/panel, copypaste number to "enter file name" section and there you go.
(panels are listed at page 32)
Re: ESAB 2200i settings
Posted: Tue Jun 23, 2015 5:55 pm
by AndersK
If you only find what you are after in "the foreign language", post a link here and I'll translate the interesting parts for you.
Assuming its Swedish then