[zank]

For my camera

https://youtu.be/QD5nnjhhmsQ

I got a little closer to a nice arc/puddle shot on this one.

https://youtu.be/Je8c8bCU1v4

Jody is a wizard. It's so hard welding around a camera!

[Superiorwelding]

Zank,
Those are great shots. I have tried before using my phone. You are right, there is a lot more behind the scenes than we think making great welding videos.
-Jonathan

[AndersK]

Your subscribers just increased with 25%

[motox]

zank
settings, material etc if you would
thanks
craig

[zank]

You bet. Tubing was 7005 aluminum in sizes ranging from 1.375" OD x 0.052" wall up to 2" OD x 0.157" wall. Filler was 3/32" 5183.

Machine was set at:
Max EN amps and waveshape - 150, Soft Square
Max EP amps and waveshape - 225, Advanced Square
Frequency - 250 Hz
Balance - 80% EN

Torch set up:
20 series
small gas lens with #8 cup
1/16" 2% Lanathanated tungsten
Argon at 18 CFH

[motox]

that machine has some serous setting..
craig