Page 1 of 1
walking the cup
Posted: Mon Mar 23, 2015 1:34 pm
by maintmech1245
Dumb question, but can you walk the cup with a flex head torch? I could see if the torch is too flexible it would bend when trying to walk it. I've obviously never used one, so thanks for the help.
Re: walking the cup
Posted: Mon Mar 23, 2015 1:53 pm
by weldin mike 27
Lots of pipe welding done with flex head. The better quality ones don't move, stay where you put them. Plus there is not too much pressure on the torch, just light surface pressure.
Re: walking the cup
Posted: Mon Mar 23, 2015 2:10 pm
by taz
Exactly.
Actually putting too much pressure when walking the cup in a mistake everyone makes at the beginning.
Re: walking the cup
Posted: Mon Mar 23, 2015 7:09 pm
by Otto Nobedder
There's actually a topic here, somewhere, about DGS, or "Death Grip Syndrome"...
Stiff-handing the torch... Too much grip and too much pressure in an instinctive attempt to keep control.
Walking the cup well requires a soft grip and a light touch, so a flex-head torch should never be a problem.
[EDIT] If you use the search function for "death grip syndrome", you'll get at least three topics with a mention.
Steve S
Re: walking the cup
Posted: Mon Mar 23, 2015 9:19 pm
by maintmech1245
Hey thanks a lot everyone!
Re: walking the cup
Posted: Thu Mar 26, 2015 9:09 pm
by DylanWelds
A lot of the welders I work with say flex head is awful for walking the cup. I've never used a flex head torch but I do have a flex loc which is great. Gives me any angle I want on a restricted or awkward weld and I can lock it into place so I can walk the cup without worrying about it moving on me. If you have the extra 200 I highly recommend buying one!
Re: walking the cup
Posted: Sat Mar 28, 2015 11:13 pm
by 'Stang
DylanWelds wrote:A lot of the welders I work with say flex head is awful for walking the cup. I've never used a flex head torch but I do have a flex loc which is great. Gives me any angle I want on a restricted or awkward weld and I can lock it into place so I can walk the cup without worrying about it moving on me. If you have the extra 200 I highly recommend buying one!
I agree! I got one last Christmas. It is great for about any position. I love it. Just wish I had more time to use it! Lol. Hate it when work interferes with fun!! The Flexlock with the super-flex cable makes life fun for a tig welder.
Re: walking the cup
Posted: Sun Mar 29, 2015 8:38 pm
by TRACKRANGER
My flex-head stays in place. The comment about death grip syndrome is very true. Light touch is all that is required for walking the cup. The pressure required to position the head is much higher.
Re: walking the cup
Posted: Sun Mar 29, 2015 11:24 pm
by cameronccc
I weld pipe with a ck 17 flex head all day everyday. So do the other 50 welders workin with me.
Sent from my iPhone using Tapatalk