Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Jason_alex
  • Posts:
  • Joined:
    Fri Jan 24, 2014 1:41 pm

Hey guys, I am having my intermittent problem with my syncowave 350 again where when I press on the foot pedal I get really low power like 5 amps max. But when I flip it to the panel for amperage it works great give me the power as it should..... any ideas where to start hunting this problem down at?
jrogers80
  • Posts:
  • Joined:
    Sun Aug 03, 2014 10:13 pm

Have you tried checking the wires all the way from the pins to the potentiometer? See if you are getting a good connection on all wires.
Jason_alex
  • Posts:
  • Joined:
    Fri Jan 24, 2014 1:41 pm

I checked it last them then plugged it back in and it worked again for a while would you check it why it is still plugged in on the back side of the cannon plug?
Post Reply