[Fred.]

Hi,

I would like to buy a Flexloc torch for my Miller MPi 220P.
From what I understand there is a 3/8 Safeloc connector on the Miller MPi 220P and a 2 pin connector.
http://www.millerwelds.com/pdf/spec_sheets/DCM9-5UK.pdf

What else do I need to connect the CK FL1325SF to my Miller MPi 220P?
http://www.ckworldwide.com/fl130.htm

What size off thread is on the Flexloc torch cable?

I don't know what I need to connect this all together. And they have to ship it from the US so I want to make sure I order the correct stuff.

Can anyone tell me?
Thanks

[Otto Nobedder]

Welcome aboard, Fred,

We have many members who may be able to give you an answer from experience. We are international in nature, so the "right " answer may take time.

If you don't have a "firsthand experience" answer within a few days' time, we'll try to help dig up the information for you.

Steve S

[Fred.]

I ordered everything, It should be alright.

I just needed a CK SL2-25 SafeLoc Male Dinse 25 (3/8"). (CK9,17,MR70) because my machine has a 3/8 connector.

When I saw the image it was easy to understand.