Had a guy pop in my shop yesterday with a small welding job.
He had been to about everyone else in the area and they all begged off the job.
It was about 2 feet of 4" copper tubing and he wanted it welded to a .250" 304
stainless steel flange. I just happened to have a couple pounds of 70-30 copper/nickel filler
so, WTH cash is cash. The ole boy couldn't understand why I took the time to bolt the flange
down to my 1" thick welding table top. LOL. A root pass, a hot pass and let cool to room temp
got me a fast $200.00 and the old timer left happy.
Didn't dare ask what it was for but I do have a real good Idea what he's doing.
Thought about snapping a picture but he was packing heat and I didn't want to push the issue.
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Gotta love those jobs....
I find most guys are scared of copper.
I find most guys are scared of copper.
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Ok, I'll bite... What do you figure he was making with it? And why the welded transition to SS instead of other options? (Can you even get sweat fittings that large?)
Grinding discs... still my #1 consumable!
- Braehill
-
Weldmonger
-
Posts:
-
Joined:Sat Jul 06, 2013 11:16 am
-
Location:Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt
@Rick H,
No Idea on what he was making, but yes you can get sweat fittings for 4". We Silver solder Copper to Stainless all the time, but seldom do we weld it. A Silver soldered joint is stronger than what most Copper tubing is rated for so there's no need to weld it in most cases.
Len
No Idea on what he was making, but yes you can get sweat fittings for 4". We Silver solder Copper to Stainless all the time, but seldom do we weld it. A Silver soldered joint is stronger than what most Copper tubing is rated for so there's no need to weld it in most cases.
Len
Now go melt something.
Instagram @lenny_gforce
Len
Instagram @lenny_gforce
Len
Ah. I suspected as much, but couldn't picture the part.rake wrote:My guess is it's a steam column for some type of distillation device if ya get my drift.
Grinding discs... still my #1 consumable!
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Quite legal, off the shelf, but...Drifta-X wrote:Oh I forget I alcohol still is illegal in the states yeah??
Of the shelf item here in australia
Home distillation is limited to something like five gallons per year, or else you're required to be a licenced distiller. The illegal moonshine trade is still quite common, though, and a steam column that size suggests more of a "5 gallons per day" production capacity, so I agree, I wouldn't have ask the (armed) fellow too many questions...
Steve S
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I think the guy on the right is "Popcorn" Sutton, who committed suicide after the BATF decided to press charges after he did "one last run" for a PBS documentary.rake wrote:He did sort of look like the guy on the right!
"Land of the free", indeed.
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
Well your more free than some counties including mine - but it seems like the ATF does'nt like to play fair - not since Ruby Ridge anyhow - a little " shine " was a normal " rural " pursuit ! - still it's always easier to chase guys for some minor matter than sort out all the drug dealers.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
True. The cops, like any other predators, go after the easy game. (Yes, I used "moderator privelege" to prevent a backlash from the PC Police. I'm sorry about that, for the same reason you said it in the first place.)noddybrian wrote:Well your more free than some counties including mine - but it seems like the ATF does'nt like to play fair - not since Ruby Ridge anyhow - a little " shine " was a normal " rural " pursuit ! - still it's always easier to chase guys for some minor matter than sort out all the drug dealers.
Steve S
Otto Nobedder wrote:I think the guy on the right is "Popcorn" Sutton, who committed suicide after the BATF decided to press charges after he did "one last run" for a PBS documentary.rake wrote:He did sort of look like the guy on the right!
"Land of the free", indeed.
Actually Steve they gave him a pass on that run and all the shine was confiscated and destroyed.
It's the run he made the following year without any cameras that got him in trouble.
Beings as it's dang near the same thing, yes.
I've being told that people making there own biodiesel/waste fuels/etc, are supposed to pay a tax for each gallon.
Do many people do it? Hell no.
That would negate the savings of making your own fuel.
Sent from my SM-G900R4 using Tapatalk
I've being told that people making there own biodiesel/waste fuels/etc, are supposed to pay a tax for each gallon.
Do many people do it? Hell no.
That would negate the savings of making your own fuel.
Sent from my SM-G900R4 using Tapatalk
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
@ Otto - no worries - I expected it ! - just could'nt resist calling it how it is ! but if you lived where I do you'd understand.
Interesting on the fuel question - I run a diesel Toyota pick up on processed waste cooking oil - but that is becoming more difficult as there are so many regulations now they are classing the stuff as hazardous waste & making it very hard to get - they tried taxing it & the paper work was so difficult to administer for so little profit they gave up - we can make a limited amount if it's for our own personal use & not sold without registering or paying tax - I never investigated if it would be worthwhile trying to make a gas substitute - might look into that - but I doubt it's economic - even with fuel the price it is - I'm interested if only from the " prepper " perspective - canned goods etc are easy enough & I normally keep sufficient reloading stocks to not worry much as it's not like the wild west in the UK - but a renewable fuel source is a great idea - bit off topic I know - but if any members do produce fuel themselves I'm sure there would be plenty of interest - make a good new topic.
Interesting on the fuel question - I run a diesel Toyota pick up on processed waste cooking oil - but that is becoming more difficult as there are so many regulations now they are classing the stuff as hazardous waste & making it very hard to get - they tried taxing it & the paper work was so difficult to administer for so little profit they gave up - we can make a limited amount if it's for our own personal use & not sold without registering or paying tax - I never investigated if it would be worthwhile trying to make a gas substitute - might look into that - but I doubt it's economic - even with fuel the price it is - I'm interested if only from the " prepper " perspective - canned goods etc are easy enough & I normally keep sufficient reloading stocks to not worry much as it's not like the wild west in the UK - but a renewable fuel source is a great idea - bit off topic I know - but if any members do produce fuel themselves I'm sure there would be plenty of interest - make a good new topic.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I *think* for homebrew ethanol fuel, permitting and taxes aside, you can have only so much on hand (like the 5-gallon home distillation whiskey limit) that has not been denatured. Once Methanol is added so it's unfit to drink, it's no longer "moonshine".
As an aside, when I built ethanol plants, during startup it was common practice to give each person on site who wanted it up to five gallons of 190-proof before denaturing. Not sure this was strictly legal (perhaps the 5 gallons per kept it legal), but it happened.
I'm tempted to google all the regulations, as I'm sure they've changed since I looked it up 30 years ago, but I'd hate the NSA to tell the BATF to keep an eye on me...
Steve S
As an aside, when I built ethanol plants, during startup it was common practice to give each person on site who wanted it up to five gallons of 190-proof before denaturing. Not sure this was strictly legal (perhaps the 5 gallons per kept it legal), but it happened.
I'm tempted to google all the regulations, as I'm sure they've changed since I looked it up 30 years ago, but I'd hate the NSA to tell the BATF to keep an eye on me...
Steve S
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Thanks... That makes much more sense than prosecuting for making a documentary.rake wrote: Actually Steve they gave him a pass on that run and all the shine was confiscated and destroyed.
It's the run he made the following year without any cameras that got him in trouble.
Steve S
Otto Nobedder wrote:Thanks... That makes much more sense than prosecuting for making a documentary.rake wrote: Actually Steve they gave him a pass on that run and all the shine was confiscated and destroyed.
It's the run he made the following year without any cameras that got him in trouble.
Steve S
Also diagnosed with cancer
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities