Page 1 of 2
Finally getting a little better!
Posted: Thu Jul 17, 2014 9:15 pm
by Zach_T
Been practicing and finally think I'm starting to get the hang of it! 1/8" angle welded at 100amps with 3/32 tungsten and 1/8" er70-s2
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 9:18 pm
by Superiorwelding
Zach
Looking good bud. For conversation and cureosity, what tungsten did you use? Keep it up!
-Jonathan
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 9:20 pm
by Zach_T
Superiorwelding wrote:Zach
Looking good bud. For conversation and cureosity, what tungsten did you use? Keep it up!
-Jonathan
I'm not positive but I'm still trying to remember which is which but I want to say 2% thoriated
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 9:23 pm
by Superiorwelding
What color was the band, red?
-Jonathan
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 9:41 pm
by Zach_T
Superiorwelding wrote:What color was the band, red?
-Jonathan
Yes it was red
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 10:05 pm
by Superiorwelding
Zach_T wrote:Superiorwelding wrote:What color was the band, red?
-Jonathan
Yes it was red
2% thorated.
-Jonathan
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 10:28 pm
by AKweldshop
.030 mig....
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 10:47 pm
by Zach_T
AKweldshop wrote:.030 mig....
??
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 10:49 pm
by AKweldshop
Zach_T wrote:AKweldshop wrote:.030 mig....
??
HAHA!!
I'm joking.
Looks good...
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 10:53 pm
by Zach_T
AKweldshop wrote:Zach_T wrote:AKweldshop wrote:.030 mig....
??
HAHA!!
I'm joking.
Looks good...
You had me confused!!
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 10:55 pm
by AKweldshop
In real repairs you'd use mig on 1/8 angle....
Anyway,
Don't let my opinions stop you from tigging...
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 10:59 pm
by Zach_T
AKweldshop wrote:In real repairs you'd use mig on 1/8 angle....
Anyway,
Don't let my opinions stop you from tigging...
Haha it's just what I had laying around
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:02 pm
by MinnesotaDave
AKweldshop wrote:In real repairs you'd use mig on 1/8 angle....
Anyway,
Don't let my opinions stop you from tigging...
Callin BS on you bud
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:02 pm
by AKweldshop
Zach_T wrote:AKweldshop wrote:In real repairs you'd use mig on 1/8 angle....
Anyway,
Don't let my opinions stop you from tigging...
Haha it's just what I had laying around
No, No.
I was just voicing my opinion a little to much.
Tig is great for clean, pristine, and perfect condition metal.....
IMO,
Mig is much more valuable a process for general steel....
Yep Dave,
You can call it....
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:09 pm
by Zach_T
Haha c'mon guys just come I'm 17 doesn't mean you can confuse me like that!! Haha
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:11 pm
by AKweldshop
Zach_T wrote:Haha c'mon guys just come I'm 17 doesn't mean you can confuse me like that!! Haha
My bad bro....
Keep on burning!
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:12 pm
by Zach_T
I'm just horsin around I'm glad everybody's givin me tips and all that before I get into the real world!
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:13 pm
by Zach_T
AKweldshop wrote:Zach_T wrote:Haha c'mon guys just come I'm 17 doesn't mean you can confuse me like that!! Haha
My bad bro....
Keep on burning!
Haha don't worry my feelins ain't hurt
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:19 pm
by AKweldshop
Hey,
Glad you like tig.
Good skill to have, if you get good at it.
It has its many places. Welding on farm machinery in the wind isn't one of them.
Tig is to delicate for me....
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:21 pm
by Superiorwelding
Zach,
Where did you have the flux capacitors set at? Don't over heat them or it will time warp you.
-Jonathan
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:24 pm
by MinnesotaDave
Superiorwelding wrote:Zach,
Where did you have the flux capacitors set at? Don't over heat them or it will time warp you.
-Jonathan
Bwahahahaha!!!
Besides, flux capacitors are only used for stick welders and flux core welders....
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:25 pm
by AKweldshop
MinnesotaDave wrote:Superiorwelding wrote:Zach,
Where did you have the flux capacitors set at? Don't over heat them or it will time warp you.
-Jonathan
Bwahahahaha!!!
I thought that sounded phony too.
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:36 pm
by Zach_T
Haha I look away for two seconds and I'm lost again..
Re: Finally getting a little better!
Posted: Thu Jul 17, 2014 11:40 pm
by AKweldshop
Zach_T wrote:Haha I look away for two seconds and I'm lost again..
Me too.
And I thought Jonathan was one of the nice ones...
Re: Finally getting a little better!
Posted: Fri Jul 18, 2014 12:02 am
by Zach_T
AKweldshop wrote:Zach_T wrote:Haha I look away for two seconds and I'm lost again..
Me too.
And I thought Jonathan was one of the nice ones...
haha I have no idea whos on my side and who isn't!! Just kiddin!