Cheap Jumbo Pyrex Kit
Posted: Mon Apr 21, 2014 1:35 pm
I thought I'd share a find, since this came up in another thread. That jumbo Pyrex gas lens setup you see Jody using normally sells as a kit for $75+ in one size and $188+ for the full range.
But http://mwsco.com sells the same kit for $55.26 - or, get the whole range of sizes for $100.74. I just did this, and the order was actually fulfilled directly from CK.
Buy the kit you want ($55.26):
D4GS040LD 4 Series Large Gas Saver. for .040" w/Glass Cup
D4GS116LD 4 Series Large Gas Saver. for 1/16" w/Glass Cup
D4GS332LD 4 Series Large Gas Saver. for 3/32" w/Glass Cup
D4GS418LD 4 Series Large Gas Saver. for 1/8" w/Glass Cup
Then add other collet sizes ($2.51):
4C040GS Collet for .040" Gas Saver
4C116GS Collet for 1/16" Gas Saver
4C332GS Collet for 3/32" Gas Saver
4C418GS Collet for 1/8" Gas Saver
And other tungsten adapters / screen sizes ($12.65):
TAS040GSLD Tungsten Adapter w/Screens for .040", Large Dia.
TAS116GSLD Tungsten Adapter w/Screens for 1/16", Large Dia.
TAS332GSLD Tungsten Adapter w/Screens for 3/32", Large Dia.
TAS418GSLD Tungsten Adapter w/Screens for 1/8", Large Dia.
FYI, P/N in the first 2 sections are specific to 17/18/26 torches. For 9/20 torches, replace "D4" in the kit part number with "D2", and replace "4C" with "2C" for the collets.
FWIW,
Richard
(No affiliation with the site, just a very happy consumer. FYI, it's run by the same guys that own WeldFabulous.com)
But http://mwsco.com sells the same kit for $55.26 - or, get the whole range of sizes for $100.74. I just did this, and the order was actually fulfilled directly from CK.
Buy the kit you want ($55.26):
D4GS040LD 4 Series Large Gas Saver. for .040" w/Glass Cup
D4GS116LD 4 Series Large Gas Saver. for 1/16" w/Glass Cup
D4GS332LD 4 Series Large Gas Saver. for 3/32" w/Glass Cup
D4GS418LD 4 Series Large Gas Saver. for 1/8" w/Glass Cup
Then add other collet sizes ($2.51):
4C040GS Collet for .040" Gas Saver
4C116GS Collet for 1/16" Gas Saver
4C332GS Collet for 3/32" Gas Saver
4C418GS Collet for 1/8" Gas Saver
And other tungsten adapters / screen sizes ($12.65):
TAS040GSLD Tungsten Adapter w/Screens for .040", Large Dia.
TAS116GSLD Tungsten Adapter w/Screens for 1/16", Large Dia.
TAS332GSLD Tungsten Adapter w/Screens for 3/32", Large Dia.
TAS418GSLD Tungsten Adapter w/Screens for 1/8", Large Dia.
FYI, P/N in the first 2 sections are specific to 17/18/26 torches. For 9/20 torches, replace "D4" in the kit part number with "D2", and replace "4C" with "2C" for the collets.
FWIW,
Richard
(No affiliation with the site, just a very happy consumer. FYI, it's run by the same guys that own WeldFabulous.com)