Page 1 of 1
new to TIG, a little practice time tonight
Posted: Tue Mar 04, 2014 11:01 pm
by brokeitagain
didn't get near enough time in tonight, only had about 10 minutes of play time tonight, no propane for the shop heater and wasn't worth firing up the wood stove, I have a few boxes of these Stainless Swagelok fittings that have been appearing outside of my shop for the last few months so I figured id burn a few up, definitely need more practice but getting the hang of it I believe
Re: new to TIG, a little practice time tonight
Posted: Tue Mar 04, 2014 11:06 pm
by Superiorwelding
Looking good if you ask me. If you get any more mysterious Swagelok fittings and you don't want them, mail them to me
-Jonathan
Re: new to TIG, a little practice time tonight
Posted: Tue Mar 04, 2014 11:10 pm
by brokeitagain
im betting I have over a hundred straight 1/2'' and 4 or 50, 90* 1/2''. hoping some tubing appears I might use these to plumb air lines in my shop if they make NPT adapters for it
Re: new to TIG, a little practice time tonight
Posted: Wed Mar 05, 2014 7:23 pm
by Otto Nobedder
brokeitagain wrote:im betting I have over a hundred straight 1/2'' and 4 or 50, 90* 1/2''. hoping some tubing appears I might use these to plumb air lines in my shop if they make NPT adapters for it
Yep, Swegelok makes NPT to tube, M and F, in all standard sizes.
Steve S