watching the videos i see Jody tacking all the time with just a fraction of a sec. burst. it would seem easy with a finger
trigger but what about a foot pedal? is there a setting for a burst time on the welder? (dynasty 200dx)
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
I can set my pedal to act like a switch. Any travel triggers the arc but no control over amperage. That way, it could just be a quick tap on the pedal instead of pushing it all the way down. You might be able to do something like that but I don't believe the dynasty has a timer like that.
Nick
Thanks! I see that now. i must have just skipped that when i first read the manual. now if i can just hit the right buttons
and switches in the right order while the display is scrolling and before it times out (or is it till it times out?) and select the proper mode and dial the output and save the settings...it might just work!![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
and switches in the right order while the display is scrolling and before it times out (or is it till it times out?) and select the proper mode and dial the output and save the settings...it might just work!
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
I belive he just sets the pedal to give about twice the required welding amps then plants the foot and backs off straight away. The speed of the tack comes from the quick action on and of the pedal. No other settings needed. ![Smile :-)](./images/smilies/icon_e_smile.gif)
![Smile :-)](./images/smilies/icon_e_smile.gif)
quick finger - it's in this video.rtv wrote:he must have one heck of a quick foot!!!!
http://www.youtube.com/watch?v=R9-nzrxM ... ApS_m_6mPw
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities