Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
schedule 10 stainless
Post Reply
demonic
  • Posts:
  • Joined:
    Mon Oct 05, 2009 10:41 pm

Anybody out there have any tips on tig welding schedule 10 stainless? parameters? gap?
Top
brian
  • Posts:
  • Joined:
    Sat Oct 03, 2009 10:11 pm

Tight fit up, purge the inside, DC-, 50-70 amps, depending on how fast you move. no filler or 1/16" filler. should be a good start.
Top
demonic
  • Posts:
  • Joined:
    Mon Oct 05, 2009 10:41 pm

that was what i was thinking. thanks for confirming that for me. Do you think that rice paper would be sufficient for damming?
Top
DarkDraggon
  • Posts:
  • Joined:
    Mon Oct 05, 2009 1:53 am

Tight fit up is important. Rice paper should be fine, I use what ever is handy, tape it up and don't catch it on fire.
Top
demonic
  • Posts:
  • Joined:
    Mon Oct 05, 2009 10:41 pm

Thanks for the tips guys.
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”