Page 1 of 1
Opinion on possible buy?
Posted: Wed Sep 18, 2013 1:28 pm
by fern78
Need an opinion on a possible purchase of a used unit. I came across an older Miller EconoTig AC/DC . I would love to get my feet wet on a affordable unit before spending big bucks. The problem is that it does not come with a torch, foot control or bottle/valve, Basiclly just the welder but for $150 bucks . Or am i going to have more invested than what its worth or just save the headache.
Like i said i just want to get my feet wet with a good welder for a good price.
Thanks for the feedback.
Re: Opinion on possible buy?
Posted: Wed Sep 18, 2013 9:52 pm
by Otto Nobedder
A buck-fifty is a great price, if the seller can prove it works.
You can find the rest on e-bay, including the bottle (note the "certification date" on the bottle, unless you're buying a lease, and can simply swap it at your local weld supply).
I'd hunt on e-bay, and add up the costs, but I'm sure you'll still come in far cheaper than "new and complete".
Steve S
Re: Opinion on possible buy?
Posted: Thu Sep 19, 2013 5:08 am
by Mike
Welcome to the forum 78.
Re: Opinion on possible buy?
Posted: Thu Sep 19, 2013 7:39 pm
by Nils
$150? Caveat emptor, baby!
Re: Opinion on possible buy?
Posted: Thu Sep 19, 2013 10:20 pm
by Otto Nobedder
Nils wrote:$150? Caveat emptor, baby!
Exactly why I added, "If the seller can prove it works"...
Steve S.
Re: Opinion on possible buy?
Posted: Mon Sep 23, 2013 9:29 pm
by fern78
Well I said what the hell and got it. Ended up getting it for $100 bucks brought it home and plugged it in . Fan works and sounds like it hums good but without any leads or torch I just have no idea yet. When I engage it on stick weld the contactor makes a loud buzzing noise so I ordered a new one. Can you guys think of a way to test it before I start dumping money on a foot controller,torch,and bottle?
Thanks for the replies.