Welding Tips and Tricks

Is is possible to tig weld brass to mild steel and if so what should the filler material be?

high frequency....use an aluminum setting,and brass rodsthat are available for O/A brazing...sand them clean with scotch-brite pad or sanding cloth to remove varnish/dip .... I have personally repaired several Airco Air arc whips, when the brass lugs were broken or burnt off....blow me if i'm wrong , but high frequency seems to be the only electric arc method that works on conductive and highly conductive metals.

Silcone-bronze filler rod. Gotta get the heat on the brass and than work from there.