I'm new to TIG and I have a Multimatic 220 machine. I find the torch cord that came with the machine to be very stiff. Stiff to the point that the torch has negative or positive torque in one direction depending on how the cord sits(if that makes sense). I assume that in order to upgrade to an aftermarket cord and torch I will need to buy a 25mm dinse adaptor. I'm also assuming that aftermarket cords such as those from CK worldwide are much more flexible. All newbie questions so thanks in advance.
Any suggestions for aftermarket cords/torches?
You hit it on the head: a 25’ Superflex cable set from CK works great. I have the same setup on both my MultiMatic and my Dynasty. You can order the cables through Weldmonger.com and get a great deal and support Jody too.
25mm Dinse is the correct call as well.
25mm Dinse is the correct call as well.